racingclubuk
Regular Member
- Joined
- Nov 3, 2004
- Messages
- 146
- Reaction score
- 0
- Points
- 0
- Age
- 49
- Website
- www.racingclubfc.com
- My Satellite Setup
- IBM Supercomputer
- My Location
- Ogmore by Sea - South Wales
OK - have got my Moteck SG2100 setup - works a treat on my Fortec Ultra with USALS.
However, with my DB................. 'O'-red
First tried with Hydra Zeus - set the motor to 70ma & no GotoX. Stored 28e, 19e & 13e with no real problem.
However, the dish only moves intermittently. Sometimes if I change to a channel on, say, 13e the box will say 'switch - no signal' (or similar) then 30 secs later turn the dish. Sometimes it will never turn the dish. Sometimes it will turn the dish immediately.
Tried the latest RuDream image - this seems marginally better. Will turn the dish between 19e & 28e no problem back & fore - but sometimes 'forgets' to turn to 13e.
I notice that some people seem to have similar problems (such as Wobbler).
Does anyone else run a SG2100 & DB7000 together? & If so what image/setup etc?
However, with my DB................. 'O'-red
First tried with Hydra Zeus - set the motor to 70ma & no GotoX. Stored 28e, 19e & 13e with no real problem.
However, the dish only moves intermittently. Sometimes if I change to a channel on, say, 13e the box will say 'switch - no signal' (or similar) then 30 secs later turn the dish. Sometimes it will never turn the dish. Sometimes it will turn the dish immediately.
Tried the latest RuDream image - this seems marginally better. Will turn the dish between 19e & 28e no problem back & fore - but sometimes 'forgets' to turn to 13e.
I notice that some people seem to have similar problems (such as Wobbler).
Does anyone else run a SG2100 & DB7000 together? & If so what image/setup etc?