andel
Regular Member
- Joined
- Jun 16, 2009
- Messages
- 275
- Reaction score
- 0
- Points
- 16
- Age
- 49
- My Satellite Setup
-
DM800, DM600, Technomate Diseqc Motor, 90cm Dish
Panasonic 42" Plasma 1080p
Pioneer VSX-LX70 Amp
Sky HD
B & W 5.1 Speaker Setup
Popcornhour Media center
Xbox 360
- My Location
- Watching T.V in the UK
Up untill now I've been sharing on my internal lan from my dm800 hosting my card to my dm500.
This is my cfg on my dm800
This is my cfg on my dm500
I understand that I have to forward the newcamd port that im using on my router (60000) to the dm800 ip but i dont think I have to forward my cccam port too? (32452)
I'm assuming that I only need to change the ip address in my dm500 cfg to show my external ip/dyndns. Is this right?
I have tried all the above but while in telnet to newcs if I change the dm500 cfg ip it logs me out of newcs then logs me back in when I change it back.
I have read that my particular (isp supplied) router, speedtouch dg585v6 does have its problems with port forwarding and many people have bridged this router to modem mode and used another router to port forward.
Is there anyone that can help with checking my ports?
Just thought I'd ask before going down the road of changing my router and ask if there is anything wrong with my cfg?
This is my cfg on my dm800
Code:
SERVER LISTEN PORT : 32452
N: 192.168.1.64 60000 dm800user dm800pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
F: dm500user dm500pass 32452 2 1 0 { 0:0:1 }
This is my cfg on my dm500
Code:
N: 192.168.1.64 60000 dm500user dm500pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
I understand that I have to forward the newcamd port that im using on my router (60000) to the dm800 ip but i dont think I have to forward my cccam port too? (32452)
I'm assuming that I only need to change the ip address in my dm500 cfg to show my external ip/dyndns. Is this right?
I have tried all the above but while in telnet to newcs if I change the dm500 cfg ip it logs me out of newcs then logs me back in when I change it back.
I have read that my particular (isp supplied) router, speedtouch dg585v6 does have its problems with port forwarding and many people have bridged this router to modem mode and used another router to port forward.
Is there anyone that can help with checking my ports?
Just thought I'd ask before going down the road of changing my router and ask if there is anything wrong with my cfg?