jpsr
Regular Member
- Joined
- Aug 27, 2009
- Messages
- 269
- Reaction score
- 17
- Points
- 18
- Age
- 42
- My Satellite Setup
- 1.2 channel master, cm polar mount, 12 inch actuator, Andrews feedhorn, Inverto lnb, Superjack positioner, Dreambox dm 500s, Protek 9600ip, 1m channel master with black ultra & 1m gibertini with technomate twin output lnb on astra 1/2, TM 5200 & 1000
- My Location
- Mullingar, Ireland
I recently conncted back up my tm 5200 looped through to my dm 500s, which is connected to vbox and 1.2 channel master, feedhorn, inverto lnb.
When say on 28.2e i get good quality readings on a good few tps of 98% and the lowest being about 70%, which i thought would be more using a 1.2 cm.
On some of the tps which i get 98% quality, i get fluctuation from 98-80, when i slightly move the dish i get 98% with no fluctuation, but then other tps drop to 88% which were 98%.
When using my dreambox i get snr of 94% - 99 on 28.2e with no problems at all. same with protek 9600.
When say on 28.2e i get good quality readings on a good few tps of 98% and the lowest being about 70%, which i thought would be more using a 1.2 cm.
On some of the tps which i get 98% quality, i get fluctuation from 98-80, when i slightly move the dish i get 98% with no fluctuation, but then other tps drop to 88% which were 98%.
When using my dreambox i get snr of 94% - 99 on 28.2e with no problems at all. same with protek 9600.