Single polarity lnb

Dishy274

New Member
Joined
Nov 17, 2019
Messages
6
Reaction score
0
Points
1
Age
78
My Satellite Setup
2.3meter c band mesh and Ultra Plus X1000HD receiver
My Location
Townsville Australia
I am removing my duel band lnbf in favor of 2 dedicated single Polarity lnbs.
As there will be no need for any voltage switching for vertical or horizontal what changes do I make in my satelitte receiver setup.
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,536
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Without some pictures of what you already have, nobody will be able to advise you.
 

Dishy274

New Member
Joined
Nov 17, 2019
Messages
6
Reaction score
0
Points
1
Age
78
My Satellite Setup
2.3meter c band mesh and Ultra Plus X1000HD receiver
My Location
Townsville Australia

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,536
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
What about the names of equipment on site, beyond the dish type?
 

moonbase

Small Dish Man
Joined
Mar 29, 2004
Messages
4,370
Reaction score
4,470
Points
113
My Satellite Setup
.
My Location
UK
I am removing my duel band lnbf in favor of 2 dedicated single Polarity lnbs.
As there will be no need for any voltage switching for vertical or horizontal what changes do I make in my satelitte receiver setup.

Are you going to use one receiver to process signals from the two separate LNB's?
If you have a twin tuner receiver then you could connect each LNB to its own input on the receiver, one input for H and one input for V. You could then have an H version of a satellite and a V version of the same satellite with signals coming from the relevant inputs.

Or, are you going to use some type of switch to merge the signals from the separate LNB's into a single input into the receiver?

Or, are you going to use two separate receivers, one receiver for each LNB?

There are several options and depending on what option you use the receiver configuration might be different.
 
Top