Sly Uk + Sly Italy+gbox

EDW

Regular Member
Messages
354
Likes
3
#1
Can anyone tell me if they have downloaded gbox and does it work okay?

Rupe will not be amused.
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,710
Likes
1,288
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#2
I have seen posts by people who have, but as far as I know, it is only able to accept the card as a CAM emulator, so as yet not causing a real danger to nds.
 

EDW

Regular Member
Messages
354
Likes
3
#3
rolfw said:
I have seen posts by people who have, but as far as I know, it is only able to accept the card as a CAM emulator, so as yet not causing a real danger to nds.

Hi Rolf, you're up late. New from Dr Hans below, I think this is not a splitter
but a sharer, not sure. Anyway, I aint buying with VR3's and OPUS
around. Shame about Taq x though. Ah well.



March 12, 2005, 11:01 am NEWS

*V1DE0GU4RD cards can now be shared with the "non-public" emulator gbox. This goes for both ***Italia and ***UK. It would be silly to refer to gbox as non-public since everyone probably has downloaded this emulator at this point from various places that chose not to respect the author's wish, which was not to distribude this emulator in public. I do not have the opportunity to test this emulator but the internet is full of step-by-step instructions on how to get it to work.

*DIGITAL+ will probably temporarily stop Taquilla services on March 21. When Taquilla's resume they will most probably continue in Nagravision only. The pervs are already being asked to consume all their TQ X credits before 21.3.2005.
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,710
Likes
1,288
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#5
I have no doubt that it works, but it really doesn't do much apart from allowing you to move your legit card from your digibox to your dreambox, a backward step from my viewing point of view, as I have a Sky+.

Did have a look at the installation instructions and even the properly translated ones, have info missing, or assume knowledge and are not particularly clear. As is often the case, people who have the greatest technical ability can be pants at describing what they do in terms that the layman can follow. :)
 

BGonaSTICK

Retired Moderator
Messages
5,145
Likes
0
My Satellite Setup
Dreambox 7000, Skystar2
My Location
Brighton
#6
Well Rolf, you may be right in terms of functionality, but in terms of profile I have it right up there with the opening of S2!

:D :D :D

Looks like I might finally be able to get rid of that hunk of junk under my TV at last!
 
Messages
6
Likes
0
#7
this how to is from other forum, the orignal writing is italian and was translate to english by babilon , the translations is not very good

GBOX How-to
Miniums -

to copy the rows gbox (to use gbox135.crack rename in gbox) in/var/bin via ftp -
to change attibuti the to the rows gbox in var/bin/with "chmod 777" -
to copy via ftp in var/keys the files gbox_cfg and cwshare.cfg -
if they are not present in var/keys, to insert also the several one files rom*.b, s2*.b
(beyond to the classics soft*.cfg etc etc) -
to open the rows/var/keys/gbox_cfg
Z parameter to put the IP of dreambox the Z: { 01 11 } 192,168,0,24 23
to put the IP of dreambox the parameter Or Or: { 00 } 192,168,0,24
to put the IP of dreambox the parameter L L: { 00 } 192,168,0,24 23 -
to save and to close the rows.
Activation of the GboxKeyGen.exe program:
- launch reg.bat (only before the time) -
launch GboxKeyGen.exe -
in the box serial to insert the number card (es.: if the n. card it is 0001,2345,6789 to remove the zeri and the last number, that is the 9);
we obtain the number: 12345678; to use the scentific calculator of windows, to insert the 8 figures and to convert them in esadecimale;
we obtain sequence BC61Ê, we add in front of the sequence a pair of zeri (00 BC 61 Ê).
This sequence goes inserted in the box "Serial" of the GboxKeyGen;
we press the key "Generated NDS ROWS";
in the blue part one serial of codes will appear.
- fairies copy-glue in rows of name nds (without extension) -
you take the rows as soon as created nds and mettetelo in/var/keys -
activated the emu on the img prechosen Connected the your smartmouse/phoenix (set up like smartmouse to 3.57/58 MHz) on the seriale of the DB with a normal seriale cable (pin-to-pin)
and inserted smartcard the NDS to you.

The IP address is not neccessary to change
This post has been edited 1 time(s), it was last edited by pippodark on 11.03.2005 20:33


picture of sky italia on a dream box

http://www.satnews.it/vbforum/showt...07&page=7&pp=20
 

EDW

Regular Member
Messages
354
Likes
3
#8
Looks like the file is really public.

h**p://www.satnet.ch/file/download.php?id=507

Not tested by me.




heticor said:
this how to is from other forum, the orignal writing is italian and was translate to english by babilon , the translations is not very good

GBOX How-to
Miniums -

to copy the rows gbox (to use gbox135.crack rename in gbox) in/var/bin via ftp -
to change attibuti the to the rows gbox in var/bin/with "chmod 777" -
to copy via ftp in var/keys the files gbox_cfg and cwshare.cfg -
if they are not present in var/keys, to insert also the several one files rom*.b, s2*.b
(beyond to the classics soft*.cfg etc etc) -
to open the rows/var/keys/gbox_cfg
Z parameter to put the IP of dreambox the Z: { 01 11 } 192,168,0,24 23
to put the IP of dreambox the parameter Or Or: { 00 } 192,168,0,24
to put the IP of dreambox the parameter L L: { 00 } 192,168,0,24 23 -
to save and to close the rows.
Activation of the GboxKeyGen.exe program:
- launch reg.bat (only before the time) -
launch GboxKeyGen.exe -
in the box serial to insert the number card (es.: if the n. card it is 0001,2345,6789 to remove the zeri and the last number, that is the 9);
we obtain the number: 12345678; to use the scentific calculator of windows, to insert the 8 figures and to convert them in esadecimale;
we obtain sequence BC61Ê, we add in front of the sequence a pair of zeri (00 BC 61 Ê).
This sequence goes inserted in the box "Serial" of the GboxKeyGen;
we press the key "Generated NDS ROWS";
in the blue part one serial of codes will appear.
- fairies copy-glue in rows of name nds (without extension) -
you take the rows as soon as created nds and mettetelo in/var/keys -
activated the emu on the img prechosen Connected the your smartmouse/phoenix (set up like smartmouse to 3.57/58 MHz) on the seriale of the DB with a normal seriale cable (pin-to-pin)
and inserted smartcard the NDS to you.

The IP address is not neccessary to change
This post has been edited 1 time(s), it was last edited by pippodark on 11.03.2005 20:33


picture of sky italia on a dream box

http://www.satnews.it/vbforum/showt...07&page=7&pp=20
 
Messages
6
Likes
0
#9
I found a better how to
Hi!

This is a "how to readme" to configure you dreambox and gbox files, so you can watch the NDS encrypted channels in your dreambox.

The necessary equipment:

1) Phoenix interface
2) set it at 3,57 Mhz (frequency)
3) you need a straight Serial cable connected direct
to the serial port at the back of your dreambox
4) Dreambox 7000-7020-56x0 (obviously)
5) a smart card: Sky NDS (UK, Italy, Viasat)
6) Skybox NDS Receiver (to read the necessary data)

Preliminary operations:

First we download the necessary files from the internet.
Those must contain the following files:
reg.bat,
crypt2secur.ocx,
Gbox***Gen.exe,
gbox,
gbox_cfg,
softcam.cfg

Then, we double click on the file reg.bat so the generator will work.
Once opened close the new window and then click on the generator.

Now we read the data of our NDS card in the menu of the Skybox.
We enter the Menu and enter the following number
(via the remote control): 4-6-1.
That will take you to the Menu page that interests us.
We need the serial box id number of the receiver, which can be found in the third line down - it should be a 10 figure number.
We then remove the zeros and we convert it to hex format (with the Windows Calculator**[ see bellow]), to obtain the right values.
We put zeros in front of the the hex number, so we then have an 8 figures number -> this will give you your boxid no.

The same thing for the smartcard serial number: we take the numbers indicated in the last line (9 figures to you) excluding the last one (becomes an 8 figures one) and we convert it to hex.
After we add the zeros, so the 8 figures number is your serial number.

An example: Seriale 0012345678, Smart card 456975113:
12345678 converted to hex BC614E --> BOXID: 00BC614E
45697511 converted to hex 2B949E7 --> SERIAL: 02B949E7

When you have both sets of numbers copy and paste them into the Gbox***Gen.exe,
then press on "Generate" and you should have a series of numbers like the ones below

N: 02B949E7 00BC614E
9764A4059B51ED499C0F33F66003CCC9AB9F3E162608145383
2030EE97E2D6012B42A0A600C6B82C
4EAE3800EADA8E616DC52B9C86EC1DFA870481C1A401000182
B4299A0FDE1671F5CB8D61E275CF4E7C73543F4C6A0E8413B
6EE8E7D460A8A9C10902C4324C9FC4947D1B8B1015FBCB4EC7
269C68270B3903087BF8CF3EB0B2BD18C09

Copy and paste them into your NDS file and save, not forgetting to first delete the old one in there.This is now your own NDS file.

Installing the hardware:

We connect our pheonix interface by a serial cable to the serial port at the back of the Dreambox, remebering to set the Phoenix to the frequency of 3,57 Mhz.

It is necessary to put a tick in the Expert Menue of the Dreambox next to "Don't open serial port".

The installation of the GBOX EMU to the RuDream image:

Copy the file gbox.crack (or whatever it might be called, over 500kb in size) to var/bin folder via an FTP SW and chmod to 755 (i.e. go to File -> Changing attributes and choose 755)

Copy the files gbox_cfg and softcam.cfg to var/keys folder.
Edit the file gbox_cfg by inserting :"IP address of your Dreambox" in place of the one that's already there.

Then copy your NDS file previously created into /var/keys.

Now in the folder var/tuxbox/config - edit the file emulsit.xml by inserting the line:
gbox "helptext =" "emuadvanced="gbox "emudemon="gbox "help =" "api="3"/>

Installation of emu the GBOX in Hydra image:

Copy the file gbox.crack (or whatever it might be called, over 500kb in size) to var/bin folder via an FTP SW and chmod to 755 (i.e. go to File -> Changing attributes and choose 755)

Copy the files gbox_cfg and softcam.cfg to var/keys folder.
Edit the file gbox_cfg by inserting :"IP address of your Dreambox" in place of the one that's already there.

Always copy your previously created NDS file to var/keys folder.

Edit the file smartcam.config in var/etc. folder by inserting the following lines:

osd-name x = GBOX
emulator x = Gbox [ v.1.0 P35 ]
camd x =
daemon x = gbox
kill x =
sleep x =
zap-sleep x = 2
where x are the progressive number of the emu present.

How to start the execution:

Insert your Sky NDS card to the Phoenix interface previously connected.
We start the GBOX EMU by entering in the Menu of the Emu (for RuDream the same as with Hydra) and then press the blue key, then Select it and Save with the green key.

Done! Now you should be able to watch the nds programs in your dreambox.

==================================================

Disclaimer
The author of this document and the situated one that the public one responsibilities are not assumed on eventual damages to the equipment, neither on the resolution of the described operations over. The document does not want sure to be a esortazione to the pirateria, but if not the contrary and is dedicated to all those makes a subscriber SKY to you, regularly payers, that they want to be able to use a various receiver
from the Skybox, assuming itself in toto the own responsibilities in relation to guarantee decays, of royalties not paid, etc. etc... E' be written up according to the principle of the information right. The rows specify to you are not present on our serveur and indications on the reperibilità will not be given.
 

BGonaSTICK

Retired Moderator
Messages
5,145
Likes
0
My Satellite Setup
Dreambox 7000, Skystar2
My Location
Brighton
#10
Indeed. This has been out there for a few days now, and clearly works.

The fuss about the author not wanting it released, and various boards not being allowed to discuss it openly is all history now. Go have a ball.

Not tried it myself, as I don't have a programmer (yet!).

Personally, I think it's great it's out in the open. So what if no further versions are created or released. Someone else can now use the released code to take this forward.

The scene has been strangled enough by the profiteers recently.

STICK
 

powel000

Regular Member
Messages
238
Likes
0
My Satellite Setup
Paraclipse 2.40m solid dish,
Jonsa 1.80m dish,
3.40m mesh dish,
dreambox7020SI,
relook400S,
HUMAX, dream 500hd
90CM DISH,
My Location
AMMAN-JORDAN
#11
just curious, can any point the sky card stop working with the dream box gbox software. assuming everyone is rushing to get one
 

BGonaSTICK

Retired Moderator
Messages
5,145
Likes
0
My Satellite Setup
Dreambox 7000, Skystar2
My Location
Brighton
#12
Of course it can stop working. This isn't officially supported firmware!

It's likely that $ly will act to kill it off (or maybe even the developer?!), and it's not the sort of development you would chase if you wanted the quiet life.

Purely hobbyist stuff.

:)
 

djlemur

Regular Member
Messages
113
Likes
0
Location
Hampshire, UK
My Satellite Setup
DM7000 + 300Gb + Gemini, HH100 Rotor, 0.8m Offset Dish, 0.3db Invacom LNB
My Location
Hampshire, UK
#13
BGonaSTICK said:
Purely hobbyist stuff.:)
Hmm, anyone know if it will allow i channel to be recorded, while watching another (bearing in mind the transponder considerations)?

Any recomended card readers out there?

Yours have-been-patient-for-a-long-time-for-this...
 

BGonaSTICK

Retired Moderator
Messages
5,145
Likes
0
My Satellite Setup
Dreambox 7000, Skystar2
My Location
Brighton
#14
My understanding is that as long as it can do Phoenix at 3.57 Mhz and has a serial connection to the DB then it should fit the bill.

But as I say, 'I ain't tried it'.
 

D4ftpunk

Regular Member
Messages
358
Likes
0
My Satellite Setup
Dreambox 7020
Dreambox DM500
Sky Thomsom Digibox
StrongSat FTA Reciever
80cm Dish + 45cm Dish via Disecq A/B.
My Location
England
#15
it 100% works. Also it will work until sky issue new viewing cards, do you guys not remember sky working with the old viewing cards some time ago. Being why they issued new ones
 
Messages
1
Likes
0
My Satellite Setup
Dreambox 7000S
My Location
Europe
#16
EDW said:
Looks like the file is really public.

h**p://www.satnet.ch/file/download.php?id=507

Not tested by me.
I could not find the download location.
Does anyone know how can I contact the gbox developer?
 

rolfw

Believe it when I see it Admin.
Staff member
Messages
37,710
Likes
1,288
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
#17
The download location is still there, but the file probably isn't, the link is a year old, as is the thread. The whole scene has moved on since then and now Gbox is not the only emulator to take a Sky card. www.satnet.ch/file/download.php?id=507
 
Messages
2
Likes
0
My Satellite Setup
DM 7020S
4 X DM 500S
Keyboard
My Location
Birmingham
#18
EDW said:
Can anyone tell me if they have downloaded gbox and does it work okay?

Rupe will not be amused.

Works ok! Better than I expected
 

picop2es

Istanbul 05 -Rafazaman
Messages
18
Likes
0
My Satellite Setup
DB7020 ,Gemini 2.9 ,Gbox ,Broadband (Lol)
Motorised >30w
My Location
chester
#19
As stated in earlier posts , it does work and you can record your Sly programmes.

However every so often and then i have to remove my Sly card and insert it back into the Digibox ? it may just be static i will try and wipe my card when it happens again.

If you want a copy of my Gbox files PM me and i will send them to you
 

D4ftpunk

Regular Member
Messages
358
Likes
0
My Satellite Setup
Dreambox 7020
Dreambox DM500
Sky Thomsom Digibox
StrongSat FTA Reciever
80cm Dish + 45cm Dish via Disecq A/B.
My Location
England
#20
there are 2 cases i think in which you would need to put the sky card back in the original box once a month to be sure

1. You are using a multi-room style card
2. You have been subscribed to sky for under 1 year

otherwise gbox will update itself :)
 
Top