My receiver is Sunny 1030 dci sky, but I have changetd many times the firmware.
Now I am in this situation:
System information
S-8035DCI SKYZ
(Aug 30 2004)
S/W: V02.00.05
H/W: 12.03.A5
Loader: V6.1.9
C.A: 2.2.2
During my changes I have used a lot of these:
8000SCI_12.01.A5_030916c
BL_619v0_conv
EK-60040SKYZ_12.03.A5_040816zc
Kup230 Engineer Patched
s-8035dciaz_12[1].03.a5
V12.03.A5
V12.03.A5-En Claro
XSC-520ANV_HW12.03.A5_SW03.05.03_with_z_conv
XSC-550ANVZ_12.03.A5_041012c
AT-1030DCIA_12.03.A5_031113c
DSC-911AZ_12.03.A5_040319zc
etc,etc...
still I was fixed on: sunny-8035dciaz_12[1].03.a5 sw o2 oo o5 and BL_619v.0_conv. MY FIRST LOADER WAS 6.1.8
A lot of these I founded on: http://www.passetti.net/8000.
The problem is:
Yesterday I was unabile to return naither on sunny 1030, nor on KAON or any other version. In the past I have used easy and often this procedure.
And my answer:
Is this problem of higher version of loader who takes control ore anything else? How I can resolve it?
What is the diference betwen the versions of “KUP”’s? Does has specific feature anyone of them for my problem?
Exscuse for my english
Best regards, Artan
Now I am in this situation:
System information
S-8035DCI SKYZ
(Aug 30 2004)
S/W: V02.00.05
H/W: 12.03.A5
Loader: V6.1.9
C.A: 2.2.2
During my changes I have used a lot of these:
8000SCI_12.01.A5_030916c
BL_619v0_conv
EK-60040SKYZ_12.03.A5_040816zc
Kup230 Engineer Patched
s-8035dciaz_12[1].03.a5
V12.03.A5
V12.03.A5-En Claro
XSC-520ANV_HW12.03.A5_SW03.05.03_with_z_conv
XSC-550ANVZ_12.03.A5_041012c
AT-1030DCIA_12.03.A5_031113c
DSC-911AZ_12.03.A5_040319zc
etc,etc...
still I was fixed on: sunny-8035dciaz_12[1].03.a5 sw o2 oo o5 and BL_619v.0_conv. MY FIRST LOADER WAS 6.1.8
A lot of these I founded on: http://www.passetti.net/8000.
The problem is:
Yesterday I was unabile to return naither on sunny 1030, nor on KAON or any other version. In the past I have used easy and often this procedure.
And my answer:
Is this problem of higher version of loader who takes control ore anything else? How I can resolve it?
What is the diference betwen the versions of “KUP”’s? Does has specific feature anyone of them for my problem?
Exscuse for my english
Best regards, Artan