daddyrabbit
Member
- Joined
- May 11, 2004
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Age
- 67
i loaded a bin called toby63 bin onto my coship 2300b and now all i get is the red light wont boot ,will not do anything , i have tryed loading with difrennt computers , i did the steps that gjones posted from what i read there is not much to be done about this , i have tryed all the loaders i can find and nothing , anyone know of anything would be apreated thank you
Originally Posted by gjones
steffan_st
try this it may work
It happened to me and within minutes i fixed it.
1. Make sure you shut the back on/off switch to off.
2. Plug the serial cable to it and start the uploader tool.
3. now turn the back switch on
4. Hit the Upgrade software button and reload the file.
5. Let it load all the way and just wait till your receiver says good. Disregard if the computer says transfer complete.
once it says good i shut the back button off and it booted fine.
This is just to get the reciever back up and running but to let you know that software is Bull. Maybe soon the real thing will come out. good luck
THis happened with the 2300B.
Originally Posted by gjones
steffan_st
try this it may work
It happened to me and within minutes i fixed it.
1. Make sure you shut the back on/off switch to off.
2. Plug the serial cable to it and start the uploader tool.
3. now turn the back switch on
4. Hit the Upgrade software button and reload the file.
5. Let it load all the way and just wait till your receiver says good. Disregard if the computer says transfer complete.
once it says good i shut the back button off and it booted fine.
This is just to get the reciever back up and running but to let you know that software is Bull. Maybe soon the real thing will come out. good luck
THis happened with the 2300B.