DHeart
Speed Freak
- Joined
- Jun 16, 2004
- Messages
- 118
- Reaction score
- 0
- Points
- 0
- Age
- 47
- My Satellite Setup
- Dreambox 5620, Dreambox 500Si, with universal 3 LNB's and 2X 80cm dish.
- My Location
- Portugal
Hi everyone.
I'm having a problem that i can't solve.
I've mounted a 80 cm dish, with a Golden Interstar LNB, model GI-201, and connected to a Dreambox 5620.
My problem is that i suspect that i have no signal, because the Signal Noise Ratio and the Automatic Gain Control is indicating 0%. But if i start a transponder search my SNR indicates, always, 45% and my AGC jumps to 23% and starts to drop down until it reaches 0%. When the search is over, the receiver says that it can't find any frequency. To verify the installation or to search manually.
When i use the satfind function, the indication doesn't changes, no matter if i spin the dish 180º on the opposite direction. It is always 45% SNR.
My purpose is to receive H*spasat signal.
The LNB output is to control a motor, right?
What is that i'm doing wrong?
HHHHHHHHEEEEEEEELLLLLLLPPPPPPPP!!!
I'm about to blow!!!!
I'm having a problem that i can't solve.
I've mounted a 80 cm dish, with a Golden Interstar LNB, model GI-201, and connected to a Dreambox 5620.
My problem is that i suspect that i have no signal, because the Signal Noise Ratio and the Automatic Gain Control is indicating 0%. But if i start a transponder search my SNR indicates, always, 45% and my AGC jumps to 23% and starts to drop down until it reaches 0%. When the search is over, the receiver says that it can't find any frequency. To verify the installation or to search manually.
When i use the satfind function, the indication doesn't changes, no matter if i spin the dish 180º on the opposite direction. It is always 45% SNR.
My purpose is to receive H*spasat signal.
The LNB output is to control a motor, right?
What is that i'm doing wrong?
HHHHHHHHEEEEEEEELLLLLLLPPPPPPPP!!!
I'm about to blow!!!!