Titanium Recovery Tool

Status
Not open for further replies.

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,292
Reaction score
1,615
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
This utility has had a fair degree of success, but of course you use it at your own risk.

Translation of Readme

Good, the purpose of this small program is to try to recover the ATR to those cards that are it "lost". The program which does is to make a Reset to the card, and next send the same Worm that envia the SorryShackes, that is to say, makes just like if him dieramos to the flechita and the Disable (but with this metodo but the probable thing it is that it leaves a callus to us). The ATR Resureccion estara sending the Worm and making the Reset, until the ATR is the correct one. Once of correct ATR, the program will stop, and you dira that the card has recovered. Greetings East NaSeR P.D. program is even a Beta, if encontrais algun failure or what is, please to say it to me.
 

TazzMan

Member
Joined
May 24, 2004
Messages
1
Reaction score
0
Points
0
Age
64
Sorry to say that but these Tool dose not work with some cards.I have a Blue tit and it dose no help for me.
Best Regards
TazzMan
 

brainsuckor

Member
Joined
May 24, 2004
Messages
1
Reaction score
0
Points
0
Age
43
HI i get an error :
system error & H8007007E (-2147024770) cant find modul ? (Das angegebene Modul wurde nicht gefunden)


plz help me i use xp
 

pipposso

Member
Joined
Jun 4, 2004
Messages
1
Reaction score
0
Points
0
Age
37
home many guasanos try the prog and what is the difference between the two xtal??
 

Pity

Member
Joined
Jan 21, 2004
Messages
2
Reaction score
0
Points
0
Age
63
This software WAS used for recover the ATR in Nagra Rom3 cards.

It does not work with Titanium Cards.

It is not useful any more...

Pity
 

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,292
Reaction score
1,615
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Seems strange that 5 people have voted that it has worked with their Titanium.
 

Pity

Member
Joined
Jan 21, 2004
Messages
2
Reaction score
0
Points
0
Age
63
I'm Sorry, but it's true.

This does'nt mean that sometimes it works.

The ATR resureccion.exe was made to automate the string that the program Sorry Shakes 3.1.1 sends to the Rom3 card whet it was update to the version 377:

ROM 3 DISABLE BUGCASTERS and then RESET.

Sometimes you need to push those buttons hundreds of time to recover the ATR from the card.

Probably the string it sends to the card could recover an ART form the titanium, but i think that it is impossible.
 

Jeff Laing

Member
Joined
Jun 12, 2004
Messages
1
Reaction score
0
Points
0
Age
68
I am unable to use this recovery tool because my port com is No 3
what can I do?

Regards

Jeff Laing
 

annimal

Member
Joined
Jun 19, 2004
Messages
7
Reaction score
0
Points
0
Age
48
ive uses the dinamite software that seems to do the trick to
 

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,292
Reaction score
1,615
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Do you have a link for it annimal?
 

T24

Info Exec
Joined
Oct 9, 2002
Messages
566
Reaction score
5
Points
18
Thanks to mohsintunsi


In the little recovery proggy (I have the spanish version); you have to check the right com port (1 or 2) to which your programmer with titanium is plugged and select the phoenix mode 3.68. The readme text isists that it has to be 3.68 and not 3.57. Then; all you have to do is start the recovery by clicking "rescucitar" ("recover") and wait until the program stops. The text says the recovery is not guaranteed but it shouldn't take more than 3 minutes. Give it 5 to be sure. Then try to erase your card. If it doesn't work with Titanium prog 1.10.2, try earlier versions. Mine was finally successfully erased after three or four trials with various versions. Good luck!
 

bundu

Member
Joined
Sep 30, 2004
Messages
3
Reaction score
0
Points
0
Age
56
I mistakenly thought I had a problem with my white titanium's ATR (it was brand new), as I couldnt find any OS or ATR using the 1.10.12 progger. So I tried running this recovery tool and now I have what seems to be an infinite number of different ATR's on the card. I've been erasing for hours now, using TMB 2.6, and have gotten virgin state lots of times, for different ATR's (OS 0, 9.4, 0.8). But I still cant program any files onto it, and at the moment I just continue erasing in the hope of finally resetting the card. Consider this a warning, but help/recommendations are also very welcome. Btw, TMB is the only progger I've found that can erase, though the bananaprogrammer can identify ATR, Oh yeah, I am using a smartmouse /phoenix programmer with 3.58/phoenix setting.
bundu
 

guinness

Regular Member
Joined
Apr 2, 2004
Messages
83
Reaction score
0
Points
0
Age
53
i download the Dynamite programmer!!!does work with the infinity phonix??been trying but not luck!hope some one can help resolving the no atr problem !thanx
 

geemac

Regular Member
Joined
Feb 3, 2004
Messages
20
Reaction score
0
Points
0
Didn't work for me i'm afraid, still no atr on blue tit
 

jeallen01

Specialist Contributor
Joined
Oct 12, 2003
Messages
6,674
Reaction score
2,630
Points
113
My Satellite Setup
See Signature
My Location
Somewhere in England (possibly?)!
Hi Folks

Does this work with White Tit cards?
[I have two which will no longer programme - whilst my two Blue ones are fine]

Thanks in advance.

John A
 
Status
Not open for further replies.
Top