TPs , MULTivision and tv cabo back on Mrv214

Messages
23
Likes
0
#1
hello guys

just to let you know there is an update(MRV214) which will get you tps multivision and tv cabo on hispasat back on matrix revolution.
you could use the above update on a matrix reloaded but only if you have a CAS2 PROGRAMMER , so you could revert the cam back to reloaded from revolution if you need to.
the above update may need key01 change on tv cabo which is easy to do via remote.
check this site http://www.ucassupport.nl/casinterface/Software.htm
regards
 

Llew

cerca trova...
Staff member
Messages
14,466
Likes
3,404
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#2
allnighter said:
hello guys

just to let you know there is an update(MRV214) which will get you tps multivision and tv cabo on hispasat back on matrix revolution.
you could use the above update on a matrix reloaded but only if you have a CAS2 PROGRAMMER , so you could revert the cam back to reloaded from revolution if you need to.
the above update may need key01 change on tv cabo which is easy to do via remote.
check this site http://www.ucassupport.nl/casinterface/Software.htm
regards
Have you tried it? Looks like the 'unofficial' one to me.
Llew
 
Messages
2
Likes
0
#4
doesn't work here for TPS, with matrix revolutions, using laptop for upgrade (with cam loader). It's like the 2.13 firmware : some channels but no multivision 1-7. receiver: echostar 808ci
 

Llew

cerca trova...
Staff member
Messages
14,466
Likes
3,404
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#5
nicotine said:
doesn't work here for TPS, with matrix revolutions, using laptop for upgrade (with cam loader). It's like the 2.13 firmware : some channels but no multivision 1-7. receiver: echostar 808ci
There's a legit MRev214 at satdudez.Tried it earlier, TPS / Mvision OK.

Llew
 
Messages
23
Likes
0
#6
dont be such a cynic llew , i would not post this thread if i did not try it myself it works on all multivision , tps , tv cabo and absat .:D
 

nezbit

Regular Member
Messages
64
Likes
0
My Satellite Setup
DM5620-S Gemini 3.10, 80cm Dish on Moteck SG2100A, MRev2.25, Sky+, Sagem dBox2, DM500c Neutrino dPlus V2.01
My Location
Manchester
#8
MRev2.14 working fine on MRev in Echostar 2110CiVA. Happy days.
 

Llew

cerca trova...
Staff member
Messages
14,466
Likes
3,404
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
#9
allnighter said:
dont be such a cynic llew , i would not post this thread if i did not try it myself it works on all multivision , tps , tv cabo and absat .:D
Got to be cynical in this game allnighter :D
The page you linked to had the file posted some days ago which didn't do the business. I concede the one in the forum section is OK.

Llew
 

bigboygazza

Regular Member
Messages
28
Likes
0
#10
i tried the above link but it did not get multivision/tps useing the laptop with my mr, i got the dleifpot file from fookfiles this morning works fine all multivision/tps are ok

Bigboygazza
 

Uk2cyp

Regular Member
Messages
94
Likes
0
My Satellite Setup
TM 6900 Combo Motorised 80cm + dual lnb in UK
TM 1500 Motorised 80cm in Cyprus

Hotbird 13E
Astra 1M widebeam
Astra 1H
1W T2 Beam
7E,5E,10E,16E,26E,33E,42E
4W,7W,8W,12.5W,15W
All Ok with 80cm in cyprus
My Location
Kent UK and Cyprus
#11
Humax 5100c +MR no card
All working great for me.Upgraded using laptop
Got the files from the same place as Bigboygazza
Thanks to all for the updates
 
Messages
23
Likes
0
#12
Llew said:
Got to be cynical in this game allnighter :D
The page you linked to had the file posted some days ago which didn't do the business. I concede the one in the forum section is OK.

Llew
my bad llew i posted the wrong link :-ohmy
i meant this link after all , sorry guys
http://www.satnet.ch/file/index.php?action=savelanguage&language=en
having said that , the previous link i posted is useful for other cams and for updating the cas interface programmer too , so it does come in handy too:D
 

Jaffer

Regular Member
Messages
262
Likes
0
My Satellite Setup
Samsung A300W with component output
Hotbird & Astra2
My Location
South East England
#13
iwols said:
does it work with matrix reloaded please
Yes you can program it with MR.
 
Messages
4
Likes
0
#14
Thanks, it works great ... TPS IS BACK !

Just still one problem with multivision : i can only watch multivision 8. For the others, i get "no signal" ... I have a neotion box 3000.
Any ideas ?

rgds
--
Guillaume
 

spikeman

Regular Member
Messages
34
Likes
0
#15
odellp said:
Humax 5100c +MR no card
All working great for me.Upgraded using laptop
Got the files from the same place as Bigboygazza
Thanks to all for the updates
Hi, new at this what do I need to upgrade my came with my laptop I have a gateway Pent M with a slot where my Matrix cam fits but I have not a clue as to what to do , Do I need to purchase additional hardware or is it soft ware I can download, any help is greatly appreciated I am stranded over here in Africa if you know what I mean..
 
Messages
1
Likes
0
#18
Hi
Im am from Albania and I hanen't cas interface
Can upgrate mrv 2.14 in my recever with rs 232 cable
If yes Which software can use
Please help me
 
Top