TPs , MULTivision and tv cabo back on Mrv214

allnighter

Member
Joined
Jan 2, 2004
Messages
23
Reaction score
0
Points
0
hello guys

just to let you know there is an update(MRV214) which will get you tps multivision and tv cabo on hispasat back on matrix revolution.
you could use the above update on a matrix reloaded but only if you have a CAS2 PROGRAMMER , so you could revert the cam back to reloaded from revolution if you need to.
the above update may need key01 change on tv cabo which is easy to do via remote.
check this site http://www.ucassupport.nl/casinterface/Software.htm
regards
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
allnighter said:
hello guys

just to let you know there is an update(MRV214) which will get you tps multivision and tv cabo on hispasat back on matrix revolution.
you could use the above update on a matrix reloaded but only if you have a CAS2 PROGRAMMER , so you could revert the cam back to reloaded from revolution if you need to.
the above update may need key01 change on tv cabo which is easy to do via remote.
check this site http://www.ucassupport.nl/casinterface/Software.htm
regards
Have you tried it? Looks like the 'unofficial' one to me.
Llew
 

nicotine

Member
Joined
Aug 31, 2004
Messages
2
Reaction score
0
Points
0
Age
42
doesn't work here for TPS, with matrix revolutions, using laptop for upgrade (with cam loader). It's like the 2.13 firmware : some channels but no multivision 1-7. receiver: echostar 808ci
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
nicotine said:
doesn't work here for TPS, with matrix revolutions, using laptop for upgrade (with cam loader). It's like the 2.13 firmware : some channels but no multivision 1-7. receiver: echostar 808ci
There's a legit MRev214 at satdudez.Tried it earlier, TPS / Mvision OK.

Llew
 

allnighter

Member
Joined
Jan 2, 2004
Messages
23
Reaction score
0
Points
0
dont be such a cynic llew , i would not post this thread if i did not try it myself it works on all multivision , tps , tv cabo and absat .:D
 

nezbit

Regular Member
Joined
Aug 24, 2004
Messages
64
Reaction score
0
Points
0
Age
51
My Satellite Setup
DM5620-S Gemini 3.10, 80cm Dish on Moteck SG2100A, MRev2.25, Sky+, Sagem dBox2, DM500c Neutrino dPlus V2.01
My Location
Manchester
MRev2.14 working fine on MRev in Echostar 2110CiVA. Happy days.
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
allnighter said:
dont be such a cynic llew , i would not post this thread if i did not try it myself it works on all multivision , tps , tv cabo and absat .:D
Got to be cynical in this game allnighter :D
The page you linked to had the file posted some days ago which didn't do the business. I concede the one in the forum section is OK.

Llew
 

bigboygazza

Regular Member
Joined
Jun 15, 2004
Messages
28
Reaction score
0
Points
0
Age
38
i tried the above link but it did not get multivision/tps useing the laptop with my mr, i got the dleifpot file from fookfiles this morning works fine all multivision/tps are ok

Bigboygazza
 

Uk2cyp

Regular Member
Joined
Oct 21, 2003
Messages
94
Reaction score
0
Points
0
Age
69
My Satellite Setup
TM 6900 Combo Motorised 80cm + dual lnb in UK
TM 1500 Motorised 80cm in Cyprus

Hotbird 13E
Astra 1M widebeam
Astra 1H
1W T2 Beam
7E,5E,10E,16E,26E,33E,42E
4W,7W,8W,12.5W,15W
All Ok with 80cm in cyprus
My Location
Kent UK and Cyprus
Humax 5100c +MR no card
All working great for me.Upgraded using laptop
Got the files from the same place as Bigboygazza
Thanks to all for the updates
 

allnighter

Member
Joined
Jan 2, 2004
Messages
23
Reaction score
0
Points
0
Llew said:
Got to be cynical in this game allnighter :D
The page you linked to had the file posted some days ago which didn't do the business. I concede the one in the forum section is OK.

Llew
my bad llew i posted the wrong link :-ohmy
i meant this link after all , sorry guys
http://www.satnet.ch/file/index.php?action=savelanguage&language=en
having said that , the previous link i posted is useful for other cams and for updating the cas interface programmer too , so it does come in handy too:D
 

Jaffer

Regular Member
Joined
May 19, 2004
Messages
262
Reaction score
0
Points
0
My Satellite Setup
Samsung A300W with component output
Hotbird & Astra2
My Location
South East England
iwols said:
does it work with matrix reloaded please
Yes you can program it with MR.
 

gbraux

Member
Joined
Aug 16, 2004
Messages
4
Reaction score
0
Points
0
Age
38
Thanks, it works great ... TPS IS BACK !

Just still one problem with multivision : i can only watch multivision 8. For the others, i get "no signal" ... I have a neotion box 3000.
Any ideas ?

rgds
--
Guillaume
 

spikeman

Regular Member
Joined
May 19, 2004
Messages
34
Reaction score
0
Points
0
Age
63
odellp said:
Humax 5100c +MR no card
All working great for me.Upgraded using laptop
Got the files from the same place as Bigboygazza
Thanks to all for the updates
Hi, new at this what do I need to upgrade my came with my laptop I have a gateway Pent M with a slot where my Matrix cam fits but I have not a clue as to what to do , Do I need to purchase additional hardware or is it soft ware I can download, any help is greatly appreciated I am stranded over here in Africa if you know what I mean..
 

afro_king

Regular Member
Joined
Aug 4, 2004
Messages
11
Reaction score
0
Points
0
Age
57
What about Parabole Reunion. It is in 16degrees east on eutelsat w2.
 

ekoleka

Member
Joined
Sep 11, 2004
Messages
1
Reaction score
0
Points
0
Age
50
Hi
Im am from Albania and I hanen't cas interface
Can upgrate mrv 2.14 in my recever with rs 232 cable
If yes Which software can use
Please help me
 

pechmerga

Regular Member
Joined
Nov 15, 2004
Messages
16
Reaction score
0
Points
0
Age
56
Read "MR How to by AHAC". You'll learn faster. everuthing is explained there.
 
Top