al_madhi
Regular Member
- Joined
- Apr 6, 2004
- Messages
- 118
- Reaction score
- 2
- Points
- 18
- Age
- 53
- My Location
- Riyadh - Saudi Arabia
Hi ppl wondering if anybody can tell me what is the correct way to connect a Tv/Sat Amplifier - Frequency range for Tv 47 -860 Mhz & for Sat 950- 2150 MHz
to amplifies weak signals . As it says indoor amp. that's means to be connected indoor near the receiver , By doing so when weak signals pass through down cable 35 m ( 99 ft ) long coming from DiSEqS switch at the top , the weak signals become very weak due to the resistance of the cable , then the amp. will amplifes very weak signals instead of weak signals .
I am thinking if I connect the amp. at top near the DiSEqC switch , in this case the amp. will amplifies weak signals but not very weak signals ., Therefore weak signals will be boosted so that they can overcome the resistance of the long down cable .
Any thoughts you would have be greatly appreciated .
to amplifies weak signals . As it says indoor amp. that's means to be connected indoor near the receiver , By doing so when weak signals pass through down cable 35 m ( 99 ft ) long coming from DiSEqS switch at the top , the weak signals become very weak due to the resistance of the cable , then the amp. will amplifes very weak signals instead of weak signals .
I am thinking if I connect the amp. at top near the DiSEqC switch , in this case the amp. will amplifies weak signals but not very weak signals ., Therefore weak signals will be boosted so that they can overcome the resistance of the long down cable .
Any thoughts you would have be greatly appreciated .