- Joined
- Jan 7, 2009
- Messages
- 5,605
- Reaction score
- 6,080
- Points
- 113
- Age
- 58
- My Satellite Setup
- Some SAT-related hardware.
- My Location
- N-E from Riga
Hi all!
I, personally, do not like multifeeds but was asked many times to help building them. However, all times there was different solutions. Made some brainstorming and came to this design. I think this construction can be installed to many if not all antennas with round of flat bottom feedarm. No speak about Channel Master dishes this time.
For test I used 22mm feedarm from some trash-antenna. All I needed is to drill couple of 8mm holes in the feedarm and then fixed multifeed at the end of feedarm. Of course, if needed, the multifeed can be made wider. All LNBs, including the central one can be adjusted independently and in all possible directions. Of course..... all INOX.
Would be nice to get from you guys opinions and maybe possible improvements for this construction.
I, personally, do not like multifeeds but was asked many times to help building them. However, all times there was different solutions. Made some brainstorming and came to this design. I think this construction can be installed to many if not all antennas with round of flat bottom feedarm. No speak about Channel Master dishes this time.
For test I used 22mm feedarm from some trash-antenna. All I needed is to drill couple of 8mm holes in the feedarm and then fixed multifeed at the end of feedarm. Of course, if needed, the multifeed can be made wider. All LNBs, including the central one can be adjusted independently and in all possible directions. Of course..... all INOX.
Would be nice to get from you guys opinions and maybe possible improvements for this construction.