- Joined
- Jan 1, 2000
- Messages
- 6,693
- Reaction score
- 241
- Points
- 63
- Age
- 58
- My Satellite Setup
- 1 GigaBlue Quad plus, 1 Dreambox 5620, MOTECK SG2100A DISEqC Motor, 120 cm noname offset dish, Humax 95 cm offset dish and a few UK digiboxes.
- My Location
- Somewhere where the Sauer is Kraut and the Wurst is Brat
For information purposes:
I have used an older version of the disecq driver for my dish motor. I did update it today because I was actually looking for something else in the dvbsoft.net site and only then I noticed it has an update. So this is for all those who did not know about this update.
It works ok for me, and it seems to be slightly better than the old one.
Below is the History of this program as found in the readme file:
History:
--------
v1.6 (2004-01-22)
- new SkyNET.sys patch version 4.2.2 and 4.2.8
- add 'H-H Motor Type'
- add 'DiSEqC Timing'
- some improvements
- repaired some buggs
v1.5a (2003-10-21)
- new SkyNET.sys patch version 4.2.2 and 4.2.8
- DiSEqC timing corrected in SkyNET.sys
- SKYNET.sys works with locked SkyStar2 maybe !!!
v1.5 (2003-08-08)
- plugin supports Win98
- new SKYNET.sys works with SkyStar2 rev2.6B
v1.4 (2003-07-25)
- new plugin for ProgDVB and MyTheatre
- some new configuration items
- configuration is common for ProgDVB and MyTheatre
- repaired some buggs
v1.3 (2003-06-28)
- add Goto x.x° East fix
- add Tuner Info
- add 'Sun time'
- add 'Max Signal'
- add 'LNB Power'
- add 'Configuration'
- add 'Support Goto x.x°'
- add 'High Speed'
- motor can drive slow or high speed
- add 'True South'
- add MD Plugin v1.0
- button 'Move' rename to 'Send'
- corrected SkyNET.sys
- repaired some buggs
v1.2 (2003-06-03)
- removed button 'Run', commands are send now directly to SS2 (you don't need to tune any channel in DVB prog from now)
- you don't need to set 'DiSEqC Setting' in your DVB prog
- add Tooltips for every button and control
- add Azimuth,Elevation, ... for every satellite
- modified 'Auto x.x°'
- add Longitude,Latitude and H-H Motor range
- computed H-H motor Elevation and Dish Declination
- corrected SkyNET.sys
v1.1 (2003-05-13)
- add storing any DiSEqC command for satellite (Button 'Modify' saves command from 'Raw' for selected satellite and 'Move' send this command to driver)
- add Auto Goto x.x° function (computes and saves angular positions for satellites between two satellites)
v1.0 (2003-05-01)
First release
I have used an older version of the disecq driver for my dish motor. I did update it today because I was actually looking for something else in the dvbsoft.net site and only then I noticed it has an update. So this is for all those who did not know about this update.
It works ok for me, and it seems to be slightly better than the old one.
Below is the History of this program as found in the readme file:
History:
--------
v1.6 (2004-01-22)
- new SkyNET.sys patch version 4.2.2 and 4.2.8
- add 'H-H Motor Type'
- add 'DiSEqC Timing'
- some improvements
- repaired some buggs
v1.5a (2003-10-21)
- new SkyNET.sys patch version 4.2.2 and 4.2.8
- DiSEqC timing corrected in SkyNET.sys
- SKYNET.sys works with locked SkyStar2 maybe !!!
v1.5 (2003-08-08)
- plugin supports Win98
- new SKYNET.sys works with SkyStar2 rev2.6B
v1.4 (2003-07-25)
- new plugin for ProgDVB and MyTheatre
- some new configuration items
- configuration is common for ProgDVB and MyTheatre
- repaired some buggs
v1.3 (2003-06-28)
- add Goto x.x° East fix
- add Tuner Info
- add 'Sun time'
- add 'Max Signal'
- add 'LNB Power'
- add 'Configuration'
- add 'Support Goto x.x°'
- add 'High Speed'
- motor can drive slow or high speed
- add 'True South'
- add MD Plugin v1.0
- button 'Move' rename to 'Send'
- corrected SkyNET.sys
- repaired some buggs
v1.2 (2003-06-03)
- removed button 'Run', commands are send now directly to SS2 (you don't need to tune any channel in DVB prog from now)
- you don't need to set 'DiSEqC Setting' in your DVB prog
- add Tooltips for every button and control
- add Azimuth,Elevation, ... for every satellite
- modified 'Auto x.x°'
- add Longitude,Latitude and H-H Motor range
- computed H-H motor Elevation and Dish Declination
- corrected SkyNET.sys
v1.1 (2003-05-13)
- add storing any DiSEqC command for satellite (Button 'Modify' saves command from 'Raw' for selected satellite and 'Move' send this command to driver)
- add Auto Goto x.x° function (computes and saves angular positions for satellites between two satellites)
v1.0 (2003-05-01)
First release
