UPGRADE MR OR MRV with funcards

L

lolo69

Member
Messages
8
Likes
0
#1
Hi guys,
need some help about upgrading MRV cas from 2.14 into 2.17
with funcards 5. I wrote the cards one by one with masterburner 2.3
the first 3 cards no problem but when I inserted the last one
I got "image corrupt" Did someone have a solution for this problem.
I did the same with other upgrades and it's always on the last card tha i got the same message ????????????

thanks for any tips, i am new in updating ....

For the update
I ve got a mastera IV
and funcards 4 and 6

laurent
 
R

rob43

Regular Member
Messages
291
Likes
0
My Location
canaries
#2
lolo69 said:
Hi guys,
need some help about upgrading MRV cas from 2.14 into 2.17
with funcards 5. I wrote the cards one by one with masterburner 2.3
the first 3 cards no problem but when I inserted the last one
I got "image corrupt" Did someone have a solution for this problem.
I did the same with other upgrades and it's always on the last card tha i got the same message ????????????

thanks for any tips, i am new in updating ....

For the update
I ve got a mastera IV
and funcards 4 and 6

laurent
hi laurent. are you using the correct card? at the top of your post you say you are using funcard 5. but at the bottom of the post you say you have funcards 4 & 6?????? when upgrading you must use the correct card. and remember to erase it before rewriting.
 
L

lolo69

Member
Messages
8
Likes
0
#3
rob43 said:
hi laurent. are you using the correct card? at the top of your post you say you are using funcard 5. but at the bottom of the post you say you have funcards 4 & 6?????? when upgrading you must use the correct card. and remember to erase it before rewriting.
first of all, thanks for your reply...

in fact i have 5 fun4 cards and 1 fun6 card. i try to upgrade with fun4 files. i am trying at the moment to put the mr1170. but when i arrived at the "insert card 6" i receive "image corrupt "

laurent
 
M

mickMF

Regular Member
Messages
10
Likes
0
#6
well if it is mrv you have on your cam the only possible is whit cas
 
M

Mickha

Super Moderator
Staff member
Messages
5,297
Likes
567
#8
Hi lolo69,
MR stands for Matrix Reloaded
MRV stands for Matrix Revolution
If you try this site:
_http://www.sat-key.org/

Click on Cams files and click on which Cam you have for the latest update. I think the latest update for the MR is the 1170, but some prefer earlier versions that seem more compatible with their cards.
Best wishes
Mickha
 
L

lolo69

Member
Messages
8
Likes
0
#9
I ve got both cams

mrv with the version 2.14 and
Mr with the version 1080
but still have the same problems for updating them
and i am trying to put the 2.17 on the mrv
and the 1170 on the mr

I think that i am doing it right

thanks for your help ( to everyone ....)
 
M

Mickha

Super Moderator
Staff member
Messages
5,297
Likes
567
#10
Hi lolo69,
I found this on another forum I'm a member of:

the new in 2.17
use MOSC for PPV
=============
read me file :
=============
How to use MOSC for PPV

1. You must have MOSC with MK02(known value). Use PC program for MOSC to do this

2. In Common Interface menu (Mrv 2.12), Go to

Setup -> Edit CAS key -> seca2

3. Select 000000 :

4. Select 000000 : again

5. Enter 008 008 008 (0x080808) (This means that your card is MOSC and EMM blocker is ON).

6. Enter Index 0C (yes, OC): xx xx xx xx xx xx xx xx (your MK02 value).
Example: MK02 11 11 11 11 11 11 11 11 (hexadecimal), you must enter 017 017 017 017... (decimal)

7. Insert your card(MOSC) in the CAM.

8. You can see the channels.

How to upgrade operating keys (Index 0x0C, 0x0D, 0x0E) every month:

1. Use your PC program for MOSC and update manually keys and date.(recommended)

2. Enter SHEX : 00.00.00.00 (normal mode for standard card and blocker OFF) and wait for a while. (not recommended).


MOSC does not work in the Matrix Reloaded with this software

Perhaps it might be best just to update your MRV to 2.16 for the time being as other owners seem to be having problems.

As with your problems of updating your MR, other owners recommend using a funcard 6 to upgrade, and the file I've seen on sat-key seems to use fun 5 and 6 cards.
They also seem to be bringing out yet another version called Matrix Reborn.
I hope you sort your problems out quickly.
Best wishes
Mickha
 
L

lolo69

Member
Messages
8
Likes
0
#11
Hi Mickha thanks for your help


but still no succes.
I tried to use to use fun 5 and 6 cards but nothing changed, alway
at the last file the same message ....... I think I a gonna buy a Cas 2 Interface. Do i need something else than a Cas 2 Interface?

I also red your message with the MOSC but what do they mean with
the MK02 value ?

Again Thanks for your help.

and sorry about my english .......

Laurent
 
R

rob43

Regular Member
Messages
291
Likes
0
My Location
canaries
#12
i now have the same problem. a friend asked me to upgrade his mr from mr1081 to mr1170. i keep getting the "image corrupt" too. i have tried various versions of the mr files to no avail. i´m using fun 6´s and an infinity usb. i noticed on another site there were problems with the mr1080 & mr1081, anyone any ideas?
 
W

wolfav

Regular Member
Messages
470
Likes
0
My Satellite Setup
two sky+amstrad boxes
technomate5500ci+ with 80cm motarised dish irderto cam mr mrev +dragoncam blue tit numerous fun cards infinity pheonix compaq and dell on wirelessrouter
My Location
no mans land
#13
i used to get the corrupt message and some times if you use a different flash/loader file it will load but also it pays to download the fun card splitter files from matrixcam.com and split them yourself and for the most reliable mrev files goto gxmax.com
 
R

rob43

Regular Member
Messages
291
Likes
0
My Location
canaries
#14
thanks wolfav. i downloaded the splitter, but when trying to open it i kept getting "comdlg32.ocx" error. and i aint got a clue what that is?
 
W

wolfav

Regular Member
Messages
470
Likes
0
My Satellite Setup
two sky+amstrad boxes
technomate5500ci+ with 80cm motarised dish irderto cam mr mrev +dragoncam blue tit numerous fun cards infinity pheonix compaq and dell on wirelessrouter
My Location
no mans land
#15
rob never seen that message before have you tried using an old loader file anyway
 
R

rob43

Regular Member
Messages
291
Likes
0
My Location
canaries
#16
yes i tried it this morning and it worked fine. thank christ. still cant get the fun splitter to open, must be something up with my computer. the learning curve continues. thanks again
 
Top