godzillafan
Regular Member
- Joined
- Apr 20, 2011
- Messages
- 481
- Reaction score
- 10
- Points
- 18
- My Satellite Setup
- T90, 1 black ultra HighGrain Quuad, 20 smart lnb (2 twins), 16/1 diseqc switch, 2x emp 4/1, S9HD, Vu+ Uno,
- My Location
- South Wales
HI Guys
Not sure if the Uno posts go on this section but need some help with the T90 setup with 16lnbs.
main page on here if you want to see what the setup is like.
_http://www.satellites.co.uk/forums/pictures-members-setups-general-satellite-installations/192587-my-first-toroidal-90-multi-dish-install-20-lnbs-17.html
bascially need to know this
1. where is the menu page that will take me to add 16 single lnbs to scan into the Uno (at the moment I go to sat service and scan single lnbs)
2. that wont for 16lnbs so I need to do this (or plan to do) diseqc 10/1 x2 and emp 4/1
8 lnbs feed into each 10/1 diseqc
then feed the 2 out cables into the emp 4/1
and then feed out cable into the vu uno.
Hope this makes sense so far
Bacially how to setup the switch order and tell the uno to scan all 16lnbs (I have 14 on at the moment but will be upto 16 by the time I finish next week or so).
I hope this makes sense, if not please let me know.
Also do i need to loads any new apps to the uno to multiscan as the manual is not great and does not explain multiscans
Not sure if the Uno posts go on this section but need some help with the T90 setup with 16lnbs.
main page on here if you want to see what the setup is like.
_http://www.satellites.co.uk/forums/pictures-members-setups-general-satellite-installations/192587-my-first-toroidal-90-multi-dish-install-20-lnbs-17.html
bascially need to know this
1. where is the menu page that will take me to add 16 single lnbs to scan into the Uno (at the moment I go to sat service and scan single lnbs)
2. that wont for 16lnbs so I need to do this (or plan to do) diseqc 10/1 x2 and emp 4/1
8 lnbs feed into each 10/1 diseqc
then feed the 2 out cables into the emp 4/1
and then feed out cable into the vu uno.
Hope this makes sense so far
Bacially how to setup the switch order and tell the uno to scan all 16lnbs (I have 14 on at the moment but will be upto 16 by the time I finish next week or so).
I hope this makes sense, if not please let me know.
Also do i need to loads any new apps to the uno to multiscan as the manual is not great and does not explain multiscans