WXSat proof of concept

Analoguesat

Administrator
Staff member
Joined
Jul 26, 2003
Messages
50,739
Reaction score
11,220
Points
113
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Sky+ UK.
My Location
Scottish Borders
You can set different values for each set of directions in wxtoimg. So if you have a good view north but have hills to the south then you could set it to say 1:15. And similar for east/west


Im currently watching summat a bit unusual go over - there will be a new thread about it in a bit :)
 

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.
You know a thread for "Today's weather picture" would be nice, that way we could post a photo of whats the weather going to be like in my area.

We know we have the UK and the West coast of the US (and the North pole) but getting other locations would be nice.
 

Analoguesat

Administrator
Staff member
Joined
Jul 26, 2003
Messages
50,739
Reaction score
11,220
Points
113
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Sky+ UK.
My Location
Scottish Borders
You know a thread for "Today's weather picture" would be nice, that way we could post a photo of whats the weather going to be like in my area.

We know we have the UK and the West coast of the US (and the North pole) but getting other locations would be nice.


One brand new thread coming up :D
 

Analoguesat

Administrator
Staff member
Joined
Jul 26, 2003
Messages
50,739
Reaction score
11,220
Points
113
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Sky+ UK.
My Location
Scottish Borders
Ive finally managed to get sdr# to autotrack the satellites as they come into range one after another. Intermixing sdr#1361 orbitron & mydde. It works well when I remember to start all the different components.....
 

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.
I could not get SDR# to work on my setup, don't know what the problems were, had to use SDR Console.

So I guess I'm out of luck with the tracking part.
 
A

Archive-8

Guest
I could not get SDR# to work on my setup, don't know what the problems were, had to use SDR Console.

So I guess I'm out of luck with the tracking part.
You could try using a raspberry pi like I do. That auto tracks the satellites.

I still have a few tweaks to do but so far I am very pleased with the results now.

058AA5F9-BA8D-470E-BB9F-DDD8B11BE188.jpeg61A12FC8-5444-42DF-91BB-A2ECF125E17F.jpeg49869EB2-B0AD-424C-B76D-A6BF92948BDB.jpeg2A796ED1-5246-4F95-9190-4FE7F310A865.jpeg
 

Analoguesat

Administrator
Staff member
Joined
Jul 26, 2003
Messages
50,739
Reaction score
11,220
Points
113
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Sky+ UK.
My Location
Scottish Borders
Ive moved the antenna 20 feet or so - but Im thinking about moving it back because the house is blocking more of the low westerly arc......
 

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.
Ive moved the antenna 20 feet or so - but Im thinking about moving it back because the house is blocking more of the low westerly arc......
Can't you put it up on the roof??

I raised mine 10 feet and it works so much better.
 
A

Archive-8

Guest
Taken out the mains plug adapters and popped a bt WiFi extender in, that now feeds the network switch that the pi’s are plugged into.

Also removed the Poe feeding on of my WiFi access points the plug now goes direct to the WiFi point.

I think it’s made a big difference.

NOAA 19 16:13

A66752AF-E7CC-4CF8-B497-53ECCF0D74DE.jpeg9F5C3308-CDF3-44F2-8CCA-96C063CC7FFD.jpeg25E44EF6-1D4A-4959-BAA3-A7385E1E9EAE.jpeg4F3DE12B-656B-4E3A-89F4-2B648966FBC7.jpeg
 

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.
Yes it does look better....Question, is that Pi thingy in a case or is it bare bones out in the open??

If out in the open your interference problems (lines on the photo) could be due to system clocks (or their harmonics) on the Pi being picked up by the SDR dongle.

I found that to be the case with mine, I used a USB extension cable and put the dongle inside a shielded and grounded case, knocked most of the RFI down from the PC by 90%.
 
A

Archive-8

Guest
I
Yes it does look better....Question, is that Pi thingy in a case or is it bare bones out in the open??

If out in the open your interference problems (lines on the photo) could be due to system clocks (or their harmonics) on the Pi being picked up by the SDR dongle.

I found that to be the case with mine, I used a USB extension cable and put the dongle inside a shielded and grounded case, knocked most of the RFI down from the PC by 90%.


I have the pi in a standard pi case, the dongle is on a 50cm usb patch cable.

Sounds like I want a box like you have. any chance of a photo please?
 

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.
Yah give me a bit.
 

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.
OK here is the dongle mounted on a heat sink, (with heat sink compound under it) then the shielding in place, the little gray thing on the USB cable is a clamp on ferrite bead, like what is used on some monitor cables, it helps, the green clip is the Earth ground. (this will be replaced soon with a bigger ground wire)





RDS dongle 1A.jpg





RDS dongle 1B.jpg





Dongle shield.jpg

A small self tapping screw connects the shield and heat sink electrically at one point. (the green clip)
 
A

Archive-8

Guest
OK here is the dongle mounted on a heat sink, (with heat sink compound under it) then the shielding in place, the little gray thing on the USB cable is a clamp on ferrite bead, like what is used on some monitor cables, it helps, the green clip is the Earth ground. (this will be replaced soon with a bigger ground wire)





View attachment 117353





View attachment 117354





View attachment 117355

A small self tapping screw connects the shield and heat sink electrically at one point. (the green clip)
What’s the cage made from?

I can get a heatsink just wondering what I can use for the cage.

Thanks for posting the photos up.
 

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.
The cage is made of perforated aluminum sheet metal, do you have a Lowe's store near you?? (or equivalent)

If so then look for this stuff. (I had some scrap laying around)

Code:
https://www.lowes.com/pd/Accord-Ventilation-White-Steel-Perforated-Sidewall-Ceiling-Grilles-Rough-Opening-24-in-x-24-in-Actual-24-in-x-24-in/1000034413

It's easy to cut.
 
A

Archive-8

Guest
The cage is made of perforated aluminum sheet metal, do you have a Lowe's store near you?? (or equivalent)

If so then look for this stuff. (I had some scrap laying around)

Code:
https://www.lowes.com/pd/Accord-Ventilation-White-Steel-Perforated-Sidewall-Ceiling-Grilles-Rough-Opening-24-in-x-24-in-Actual-24-in-x-24-in/1000034413

It's easy to cut.

Just found some small rodent mesh, I will order some and have a go:Y
 

Terryl

Specialist Contributor
Joined
Apr 14, 2011
Messages
3,246
Reaction score
1,932
Points
113
Age
82
My Satellite Setup
OpenBox X5 on a 1 meter motorized dish.
And now a 10 foot "C" band dish.

Custom built PC
My Location
Deep in the Boonies in the central Sierra Nevada mountains of California.
The smaller the holes the better, the holes on the aluminum I have are about .5 mm.

You could also use aluminum window screen.
 
A

Archive-8

Guest
Just found some clip on ferrite rings.

AE07FCA1-4A9D-449C-B718-E895A1A17157.jpeg

Does it matter at which end I clip it to?

Eg dongle end
 
A

Archive-8

Guest
The smaller the holes the better, the holes on the aluminum I have are about .5 mm.

You could also use aluminum window screen.
The smallest I can find has 1mm holes. Would that be ok?

Code:
Pack of 2 - Stainless Steel Woven RODENT PROOF Mesh - 1mm Hole - A4 (210 x 300mm) Great For Airbricks https://www.amazon.co.uk/dp/B0743H3LN5/ref=cm_sw_r_cp_api_i_AZF-Ab60TKARM
 
Top