Xtreme Hornet - Updating firmware and bootloader

madlib667

Member
Joined
Nov 1, 2005
Messages
1
Reaction score
0
Points
0
Age
41
My Satellite Setup
xtreme hornet
My Location
nl
Hello!

Recently my Xtreme Hornet Skycrypt (XSC-550ANV, HW12.03.A5) was updated in a Sat shop the only thing is they put
freaking lousy software on it from Sunny. So i want to change back to the original firmware. It seems they also changed
my bootloader.. so my question is now when i perform the update to the original firmware do i need to first update the
bootloader and then the firmware ? or the other way around ?
thanks !

What are the recommended versions for the bootloader and the firmware now-a-days ?


i found the following;

Bootloader (BL_618v2_conv)
Firmware (XSC-520ANV_HW12.03.A5_SW12.05.04b)


Thanks !
 

PCD

DB Magician
Joined
Jul 19, 2003
Messages
632
Reaction score
1
Points
18
You will get all you need in hornet-stb.com, fookfiles and toes. More recent firmware with cabo and fullx, freex available. Regards, pcd.
 

Artist 2004

Anatolia correspondent
Joined
Jan 17, 2004
Messages
252
Reaction score
0
Points
0
Age
71
My Satellite Setup
GoldMaster 7400 CIM 2MB with Kaon board 12.03.a5. Technomate 1000, Technomate 5200 USB.
Two 80cm offset dishes.
My Location
West coast, Turkey
madlib667 said:
Hello!

Recently my Xtreme Hornet Skycrypt (XSC-550ANV, HW12.03.A5) was updated in a Sat shop the only thing is they put
freaking lousy software on it from Sunny.
<snipped>

Hi, I also have 12.03.A5 (in a Goldmaster box), and am delighted to find another owner who is an English speaker! I regularly update the software / keys myself, and usually it's Sunny software as there's tons of support for it on internet, mostly in Turkish web sites. I have found Fookfiles / Toecutters useful but basic as this hardware is not very well supported outside Turkey. Anyway, cutting the waffle I was just wondering what you disliked about the Sunny software?
 
Top