XTREME MSR5690cxci still standing on ON

Messages
12
Likes
0
My Satellite Setup

My Location
GERMANY
#1
HI

after one software update my XTREME MSR5690cxci still standing on ON.
On the display stay ON'O'-red
Can any poeple help me...i would like to repair the receiver.:confused

Please:-ohmy

ciao
Falco2121
 
Messages
5
Likes
0
#2
You ned a Dreamsoft flash fil. Runn the flash fil , and then a new Dreamsoft 1.4.0 bin fil .Then it is ok. !!!!!!!you have to reinstal all canal after this bot.
You can look at this adress _http://www.croteam-sat.org/aploud/index.php?&direction=0&order=mod&directory=OTHERS%20RECEIVERS%20508%20Models%20Receivers/Receivers%20Models%20X%20-%206%20Models/XTREME%20-%20Location%20of%20the%20Company%20Korea

Here is a adress to new Dreamsoft / The best. _http://www.satnet.ch/file/download.php?action=kategorie&kat_id=15&d_anfang=15&as=2http://www.satnet.ch/file/download.php?action=kategorie&kat_id=15&d_anfang=15&as=2 Look for 31/01 and D+ ok

Olger
 
Messages
12
Likes
0
My Satellite Setup

My Location
GERMANY
#3
Sorry but after start send...the message is NO ANSWERO-no

I a´m using one 0 modem cable...is that right ???:(

I hope that my xtreme is not dead:eek:

Is the last solution JTAG ???O-st
What is the right soft for use with the JTAG???:rolleyes:

Thanks

Falco2121:D
 
Messages
5
Likes
0
#4
Have you tried the Flash Bin. ? It is the rigt cable. The tuner have to be off when you start. Start first the pc program, and then turn on the tuner. You may be try to turn off and on the tuner some times before it start conting up. You have to wait to the tuner have cont down to good and Start , and wait til you se a canal number or no canel after a flash bin. Then you can turn of the tuner.
When you go to code edit , you have to reset with the red button. Reply yes on the screen . You wil se that is ok now.
Olger
 
Messages
12
Likes
0
My Satellite Setup

My Location
GERMANY
#5
Sorry but NO ANSWER:mad:

I have do the procedure...but anytime NO ANSWER and on the display stand ON:eek:

Thanks for the help olger:D

Ciao
Falco2121
 
Messages
5
Likes
0
#6
Try to pull out the cord in the tuner , then putt it bac when the pc is startingen to count up. even try to remove te cord and putt it back , once more then maby your tuner start to uppdate.
NB the flasbin i tould you about is a flash to sett the tuner back to no canel , and this wil fix your tuner.
THis is my last help to you ,,sorry if you dont gett you tuner to work.
Olger
 
Messages
12
Likes
0
My Satellite Setup

My Location
GERMANY
#7
Hi...

now i have on JTAG:D

First problem: í´m using jkeys..but the xtreme woulbn´t be reconized by Jkeys:mad:
Jkeys find the Jtag interface:)
I can not find the right procedure for flash the xtreme with the Jtag.

Can anyone give me on sugestion:rolleyes:

Sorry for my bad english;)
 
Top