Zenega CD 1004IS - Help me please

R

rag

Member
#1
Messages
14
Likes
0
My Satellite Setup
SOFTWARE
My Location
INDIA
#1
I have Zenega CD 1004IS receiver. 12534 V, 12595 V, 12647 H - For these frequencies some times picture will come and other times picture will not come and shows on the TV screen that "check the antenna settings". But signal is good for other frequencies and picture is clear for NSS6.
Please give me the utility password for Zenega CD 1004IS receiver.
 
N

nv_karma

Member
#2
Messages
14
Likes
0
My Satellite Setup
television and networking
My Location
India
#2
check that ur L-band signal is not split?
STB does'nt support with some TP. Use direct cable to LNB unless need split signal then i suggest u purchase multiport Universal Ku band LNB and Take direct cable frm LNB to STB.
 
V

virk

Member
#3
Messages
5
Likes
0
My Satellite Setup
ELECTRONICS
My Location
india
#3
which software install on this receiver ? utility pin for new software is 86427531
 
member91040

member91040

Regular Member
#4
Messages
1,482
Likes
0
My Satellite Setup
DISH TV,DIRECT DD+,
TATA SKY,HATHWAY,
NOKIA 9660S,
PCI SAT CARD TWINHAN NSS6, PAS7/10, ASIASAT3S, INSAT,INETEL SAT, EUROSTAR, DremBox, & Multi LNB'S
My Location
INDIA
#4
rag said:
I have Zenega CD 1004IS receiver. 12534 V, 12595 V, 12647 H - For these frequencies some times picture will come and other times picture will not come and shows on the TV screen that "check the antenna settings". But signal is good for other frequencies and picture is clear for NSS6.
Please give me the utility password for Zenega CD 1004IS receiver.
Click to expand...
Check your lenght of the cable, and NO Joints.
 
R

rag

Member
#5
Messages
14
Likes
0
My Satellite Setup
SOFTWARE
My Location
INDIA
#5
Hello friends
I tried your suggestions but no result. The signal quality is very poor for those frequencies. My LNB details is

Input band 107 ~ 12.75 GHz
Low band 9.75 GHz High band 10.6 GHz
Output 950 ~ 2150 MHz

Is this LNB suitable or any other frequency range LNB needed. My dish is 6 ft.
Other receivers are working properly with above LNB and dish.
Free channels are working properly with Zenega CD1004 IS

Wire used for connection is 20 m direct from dish to receiver
Please give new software and its loader to upgrade my receiver from PC
Please give me the Master password

Thanks
 
D

dspdsp

Regular Member
#6
Messages
127
Likes
0
My Satellite Setup
DishTV DTH
Zenega 1004s Receiver
90cm offset Sharp dish antenna
My Location
india
#6
Please refer experimenting with zenega you will get loader and steps to follow.
Utility Password is: 86427531
 
member91040

member91040

Regular Member
#7
Messages
1,482
Likes
0
My Satellite Setup
DISH TV,DIRECT DD+,
TATA SKY,HATHWAY,
NOKIA 9660S,
PCI SAT CARD TWINHAN NSS6, PAS7/10, ASIASAT3S, INSAT,INETEL SAT, EUROSTAR, DremBox, & Multi LNB'S
My Location
INDIA
#7
rag said:
Hello friends
I tried your suggestions but no result. The signal quality is very poor for those frequencies. My LNB details is

Input band 107 ~ 12.75 GHz
Low band 9.75 GHz High band 10.6 GHz
Output 950 ~ 2150 MHz

Is this LNB suitable or any other frequency range LNB needed. My dish is 6 ft.
Other receivers are working properly with above LNB and dish.
Free channels are working properly with Zenega CD1004 IS

Wire used for connection is 20 m direct from dish to receiver
Please give new software and its loader to upgrade my receiver from PC
Please give me the Master password

Thanks
Click to expand...
Doo one thing, only for expremental purpose, take your stb and if u have an small tv, carry it to your roof top and make your cable shoten, and then tune it, You will find the problem, Pls let me know the result , soo that every body can undersand and submit your reply.
 
N

nv_karma

Member
#8
Messages
14
Likes
0
My Satellite Setup
television and networking
My Location
India
#8
no need to 6 feet antenna size. it can come less then 1 mtr dish size. its good u are use it , check it donot be chicken mess type it should be plate type dish. because we can catch C- band in this type antenna but Ku-band only reflect frm plate or solid.. check it unless rply in detail problem..!
 
member91040

member91040

Regular Member
#9
Messages
1,482
Likes
0
My Satellite Setup
DISH TV,DIRECT DD+,
TATA SKY,HATHWAY,
NOKIA 9660S,
PCI SAT CARD TWINHAN NSS6, PAS7/10, ASIASAT3S, INSAT,INETEL SAT, EUROSTAR, DremBox, & Multi LNB'S
My Location
INDIA
#9
nv_karma said:
no need to 6 feet antenna size. it can come less then 1 mtr dish size. its good u are use it , check it donot be chicken mess type it should be plate type dish. because we can catch C- band in this type antenna but Ku-band only reflect frm plate or solid.. check it unless rply in detail problem..!
Click to expand...
Karma Bro, I cant understand what you say, Can you pls pronounce properly.
 
R

rag

Member
#10
Messages
14
Likes
0
My Satellite Setup
SOFTWARE
My Location
INDIA
#10
Hello friends
By using a high quality LNB (Santech - Koren made) the problem is solved. But sometimes in Tensports TP channels the pictutres are breaking.

Kindly give me the thread from which I can download the software(bin file). I check the thread ' experimenting with Zenega' and get the loader but no software. Please give software
 
N

nv_karma

Member
#11
Messages
14
Likes
0
My Satellite Setup
television and networking
My Location
India
#11
rag said:
Hello friends
By using a high quality LNB (Santech - Koren made) the problem is solved. But sometimes in Tensports TP channels the pictutres are breaking.

Kindly give me the thread from which I can download the software(bin file). I check the thread ' experimenting with Zenega' and get the loader but no software. Please give software
Click to expand...
Yes, I want too..
Some body mention in thread to take back up from STB. I tried for it but not proceed.
I've done:
1) Connect PC - STB Through N-M cable (2-3,3-2,5-5. rest is N/C)
2) Select database upload, give appropriate name but FILE transfer not proceed.
If any known about this pls help...
 
N

nv_karma

Member
#12
Messages
14
Likes
0
My Satellite Setup
television and networking
My Location
India
#12
member91040 said:
Karma Bro, I cant understand what you say, Can you pls pronounce properly.
Click to expand...
C- band can reflect from chicken mess antenna (net type) dish, but Ku- band cannot reflect because BW of Ku is doesn’t support to beam reflect from net.
Dear, I thought that it might happen there because he is using 6 feet antenna. Even 6 feet Solid plate for Ku band is too costly isn’t it?
Thanks
 
mehra

mehra

SATELLITE SNIFFER
#13
Messages
166
Likes
3
My Satellite Setup
2 Dish Tv Zenega STBs | 1 DM 800 HD Clone | 180 cm TX Rx Fibre offset Dish Antenna |
My Location
india
#13
nv_karma said:
Yes, I want too..
Some body mention in thread to take back up from STB. I tried for it but not proceed.
I've done:
1) Connect PC - STB Through N-M cable (2-3,3-2,5-5. rest is N/C)
2) Select database upload, give appropriate name but FILE transfer not proceed.
If any known about this pls help...
Click to expand...
karma u r not proceeding to the "EXACT" procedure i have mentioned. i have given the max detail possible. just stick to the process with patience and positive attitude, and it will b done.'

good luck.
 
member91040

member91040

Regular Member
#14
Messages
1,482
Likes
0
My Satellite Setup
DISH TV,DIRECT DD+,
TATA SKY,HATHWAY,
NOKIA 9660S,
PCI SAT CARD TWINHAN NSS6, PAS7/10, ASIASAT3S, INSAT,INETEL SAT, EUROSTAR, DremBox, & Multi LNB'S
My Location
INDIA
#14
nv_karma said:
C- band can reflect from chicken mess antenna (net type) dish, but Ku- band cannot reflect because BW of Ku is doesn’t support to beam reflect from net.
Dear, I thought that it might happen there because he is using 6 feet antenna. Even 6 feet Solid plate for Ku band is too costly isn’t it?
Thanks
Click to expand...
Bro there are many varities, of mesh, in that type also we can catch Ku signal.
 
G

ghani_pak

Member
#15
Messages
22
Likes
0
#15
HI RAG.
Just do one thing put one two way spilliter. put dish wire into input of spillitr and use any one output to connect receiver. This method is very strange but it will work 100%.
Please do this and give me u r answer.
Thanks and best regards.
 
member91040

member91040

Regular Member
#16
Messages
1,482
Likes
0
My Satellite Setup
DISH TV,DIRECT DD+,
TATA SKY,HATHWAY,
NOKIA 9660S,
PCI SAT CARD TWINHAN NSS6, PAS7/10, ASIASAT3S, INSAT,INETEL SAT, EUROSTAR, DremBox, & Multi LNB'S
My Location
INDIA
#16
ghani_pak said:
HI RAG.
Just do one thing put one two way spilliter. put dish wire into input of spillitr and use any one output to connect receiver. This method is very strange but it will work 100%.
Please do this and give me u r answer.
Thanks and best regards.
Click to expand...
what kind of spilliter? can you mention the name soo that we can buy it.
 
V

virk

Member
#17
Messages
5
Likes
0
My Satellite Setup
ELECTRONICS
My Location
india
#17
Hi Frnds ....tell Me What U Need Exactly ? I Help U All About With My Best . I Am Dish Tv Dealer And Diish Installer.
 
G

ghani_pak

Member
#18
Messages
22
Likes
0
#18
HI Member91040.

Buy any spilitter which is we r normaly using for c-band spiliting. If u r facing difficulty to find spilitter just do one thing cut wire and put jointer between them. U have to reduce the signal either u put spilitter or jointer or make long wire.

Thanks and best regards.
 
member91040

member91040

Regular Member
#19
Messages
1,482
Likes
0
My Satellite Setup
DISH TV,DIRECT DD+,
TATA SKY,HATHWAY,
NOKIA 9660S,
PCI SAT CARD TWINHAN NSS6, PAS7/10, ASIASAT3S, INSAT,INETEL SAT, EUROSTAR, DremBox, & Multi LNB'S
My Location
INDIA
#19
ghani_pak said:
HI Member91040.

Buy any spilitter which is we r normaly using for c-band spiliting. If u r facing difficulty to find spilitter just do one thing cut wire and put jointer between them. U have to reduce the signal either u put spilitter or jointer or make long wire.

Thanks and best regards.
Click to expand...
Done what you said, But bad result, I am lossing signal strength, Presently any other way.
 
You must log in or register to reply here.
Top