Zetacam RADIX dt-43 VACI

[mnadeem]

Hi
I have bought new Zetacam version Rev 2.01 ansd soft 0.78 have problem that he can not excess with radix in cas1 but in cas2 it shows identies , but if in cas1 Irdeto cam put the receiver hanged and also cas2 zetacam no more there , ok yet other problem , if only zetacam in all mode read not fun cards , but if irdeto-a or b or c then open channals but if goes up or down no more cam there , what could it be , have to update my cam or receiver has problem , please tell me what to do, )(-red
second where to find updates for zeta cam or radix , some bodt told me if 0.79 ver then perhapes it will work fine , what is diffrence between 0.77 0.78 0.79 0.91
my zetacam is yellow coverd and also p/n prd-caxx-0100. what is the real cam is that , cryptworks or x-free or joker , iam confuse , is there any one willing to helpit out , thanks in regards O-no

 

[mnadeem]

have update the cam and after that the parameters ,all,mg, vi,beta-a,ird-a,ird-b,beta-b, beta-c,nag,ird-c,nz ,,,, what das it meens , second the cam not function in slot1 but show info in slot2 as module , multi ca module v0.78 , with boxkey d2f276423dafad8d.
second by changing program receiver hanged have to restart , but if i put other cam like irde*o it works fine ,

 

[mnadeem]

have update the cam and after that the parameters ,all,mg, vi,beta-a,ird-a,ird-b,beta-b, beta-c,nag,ird-c,nz ,,,, what das it meens , second the cam not function in slot1 but show info in slot2 as module , multi ca module v0.78 , with boxkey d2f276423dafad8d.
second by changing program receiver hanged have to restart , but if i put other cam like irde*o it works fine ,

hi ({})
why any one answering to my question , or is it dificult for every one

 

[rolfw]

Unfortunately not many members have Zeta cams mnadeem.