Recent content by B2K420

Hello Guys, I have got BD RW BD-5750H DVD drive installed in DM8000. I have connected it to sata connector under the right side of hard disk i.e. I have not used usb to sata converter. When I click on DVD player it shows "BD RW BD-5750H" When I click on ok it shows folders AACS, BDMV &...

Hello Guys, I have just received a new DM8000. Please can you help me with the below and let me know if I can use something better? 1. Internal Hard Disk: WD15EARX 1.5TB as I have heard anything bigger than 1.5TB might not work smoothly with DM8000? 2. Blu-ray slim line RW: BD-5850H or...

Hello Guys, I have heard that 2 TB HD or higher does not function as well in DM8000 HD as 1 TB or 1.5 TB. Have any of you guys tried 2 TB, 2.5 TB or 3 TB in your DM8000 HD & what was the result? Thanks

digi247: I am getting sick and tired of my DM800 clone. I am thinking to buy a Genuine box this time I have read/heard that some people are having issues with Vu Duo/Uno boxes. On the other after seeing how easily TM receiver moved the dish I would like to get the TM receiver. I want these...

Hello Guys, Similar issue, I have a DM800S-HD Clone (DBUK v1.1 image) connected to a "***** Superior Dark Motor". I have used below settings but with little success: Tuner Config. Mode: Advanced -> LNB: LNB1 -> Increased Voltage: Yes -> DiSEqC Mode: 1.2 -> Longitude & Latitude -> Use USALS for...

Thanks very much for all the help. I guess, If I still want to keep the extra lnbs & get the dish motorized (knowing they will only work when lnb at the focus hits its original intended target) I can get another receiver. I can put a twin lnb on the main focus. 1 cable from the twin lnb will...

Will my box (DM800S-HD Clone) (Supports DiSEqC 1.1) & (EMP-Centauri 8x1 DiSEqC) Switch be able to interact with the motor easily, what settings I need to change in the Setup Menu so that when I move the lnb at focus to its original target I will be able to switch b/w other lnbs & if I want to...

Hello Guys, I have a fixed multi lnb dish TD110 [0.8w, 4.8e (main focus), 9.0e, 13.0e & 19.2e], is it possible if I motorize it and keep all the lnbs so that when I move the main lnb (4.8e) back to 4.8e from say 7.0e I can pick up channels from other fixed lnbs? How can I make this dream...

Hello Guys, I currently own a DM800S-HD Clone I have to flash it once every 3 months it crashes a lot and I have tried loads of images. I am thinking to buy Genuine DM8000 HD but my question is will it crash a lot and will I have issues recording stuff on the internal HD as the only reason I am...

Thank you all for our help/welcome. :thankx: I used Uncommitted DiSEqC Command (As Robbo kindly suggested as I was using Committed DiSEqC command) and they are all working now. I am just scanning all Satellites at this moment. Now the main Settings are: Committed DiSEqC command = None Command...

Hello all, My DiSEqC switch (8 Way DiseqC Emp- Centauri) has stopped switching between satellites. Only LNB1 (28.2e) is working. (I can't get any channels on LNB2 =19.2e, LNB3 = 13.0e, LNB4 = 9.0e & LNB5 = 4.8e). I have DM800-S HD Clone. I just flashed a new image on my box and since then the...