Recent content by femi

from my location

The first problem is the availability of the engines. With an engine without conversion and modification, the ± 72° should be possible. Because of the large feeds, a 36° pitch is recommended for the C band and 24° for all others. With a 60-36-0-36-60 division, 5 LNBs are possible, but the...

In diesen Fall würde ich zum Corotor greifen und je nach Antennentyp das Feed wählen. In this case I would use the corotor and choose the feed depending on the type of antenna.

Es sollte dir bewusst sein, dass diese Dimensionierung für das Zinwell LNB abgestimmt ist. LNB-seitig ausdrehen bis zu den mittleren Stegen ist kontraproduktiv. Diese Maße sind vom Abstand der Antennen des LNB und der Wellenlänge abhängig. Du kannst entsprechende Bleche auf einen Stab schrauben...

Can anybody say me is the serial TTL cable 3,3 Volts or 5,0 Volts?

Ich denke schon, werde auch für das nächste Steuergerät (für den Egis) wieder die Serie verwenden, die ich schon jetzt nutze. Der Unterschied liegt dann nur in der benötigten Spannung von 24V statt der 36V. Nachdem es Einzelanfertigungen sind, wird es JP egal sein, was er dir einbaut, solange du...

The speed and accuracy of the TechniRotors is fine with me. What I would also like is that the positions of the azimuth and elevation motors are always approached from one direction, which significantly minimizes play in the moving parts. Example: Eutelsat 16A has a value of 2000 if I always...

The inaccuracy is with the gearbox modification as I understand it. At 270° you still get 11 LNB's. I have taken the division 132-108-72-36-0-24-48-72-96-120-136 as an example, which can of course be adapted to individual needs. Die Ungenauigkeit ist mit der Getriebemodifizierung, wie ich das...

If I connect the JP-Positioner with the Technirotor, there are two possibilities. Turn continous or 8 steps. I need 32 from this 8 steps to turn the rotor from 0 to 70°. Purely out of thirst for knowledge where is the connection here?

:-ohmy I found 32 x 8 steps = 256 from 0 - 70°, that's 3,657/° 4394 / 140 = 31,386/° ... a little confused again

en After processing, the cut-out for the display looked very similar to the Chinese one. Laser lettering - If next winter gets really boring, at least I know which toy I need. Something was displayed to me in both devices, e.g. the LNB turret settings were also taken over, but reading was only...

Do anybody know how many pulse/° has the Techni-Rotor for the LNB-Revolver? Also helpful the value of 0° position. It's should be possible to make a "handmade" *.asm file @Captain Jack The lettering is not very stable. I had to realize that when I had to enlarge the cut-out for the display. A...

en I spent a day working on the two front panels. The inside height was correct, the width was not. The screw holes were the other way around. The first switch-on test, here in the picture with 36V, at least looked good. Actually, I wanted to start with the mobile antenna, because I can't ruin...

Technirotor 50mA (Standby) / 200mA (Normal) / 350mA (max.) It's the documentation from Technisat, I think this source is trustworthy. Also STAB SAT antenna rotor HH 100 Current in stand-by: 30 mA Working current: 190 mA Max. Total current: 350 mA Rotation speed: 1.8°/s(18V) ; 1,2°/s(13V)

The front panels have already arrived