Recent content by td03-5

Hi @karibu, Have you checked that you have the correct video output settings on the box that gives poor picture quality? Using the Dreambox remote control...6 Setup...3 System Settings...2 A/V Settings. Check that you have the same settings on the box with poor picture quality as you have...

Hi @wannelly, It will only work on an image that has PLi zapstream installed! If you look in your /etc/services file and don't see the line: zapstream 31344/tcp or in /etc/inetd.conf and don't see either: zapstream stream tcp nowait root /sbin/zapstream zapstream -ts...

Hi @muttleytheplug, I'm not really sure what you want!? Surely you just go through the list of channels on 28E...you try to view it...it opens...you put it in a favourites list called "28 Free" (or whatever)...it doesn't open...so you ignore it and move on to the next...until you get to the end...

Hi @karibou, @Analoguesat could be correct. If the signal level is marginal, then the extra small amount of loss through the DiSEqC switch could make the difference on the weakest channels. Double click the Info button on Dreambox remote control to bring up the channel info panel (keep...

Hi @Addidas, As has already been said, there is very little open with keys at the moment. Occasionally packages or a few channels are open for a while (as little as a day to as much as several weeks) but little for regular viewing. ORF on 19E is one of the few packages open with keys at the mo...

73 om mni tnx qso. pse qsl.;)

No @nanochickin, it will not be set until you do a reboot as I describe above. If Common Interface is the current default and you select CCcam and start it, then you pull the power plug, it will start Common Interface next time you power up. Do as I say above and then after reboot pull the...

Hi Leif, Select CCcam and start it. Next, hold the power button on the Dreambox remote control until the reboot/shut down menu appears...select Restart (or Reboot)...once the box has completed the reboot, CCcam will be the default, even if you completely disconnect the power. Best wishes, John.

Hi Folks, Although it is possible to switch the box on from the webif, it is certainly not necessary to do so when logging-in or sharing, standby will do fine. As far as I can see, it is not possible to switch the box on from an open sharing port. If someone has turned the box on remotely...

Hi @salohcin, Using the Webif , that @andel suggests, seems simplest to me (certainly the way I would deal with it). On Gemini Image (will be same or very similar for other images), make sure box is ON and not in standby, then: From PC or Laptop, Log-in to Webif (_http://ip.of.the.dreambox)...

Hi @Digital.Diablo, You would seem to have a very large and widespread 'family'! Are you sure this is not a commercial venture? I now have Dropbear SSH working, into/out of and between Dreamboxes in different locations but it does not require the level of management and control that you are...

Hi @jordie, On Dreambox remote press: Menu...press 6 (Setup)...press 6 (Expert Setup)...press 1 (Communication Setup)...and read the current IP of your Dreambox. It is best to have the Dreambox on a fixed IP. I use Address Reservation in my router. So the MAC address of my Dreambox is always...

Hi @WillowMan, Thanks for the reply. No, problem not resolved, I'm just living with it. I still have my trusty 1.09 image in flash and, like you, mostly use a Gemini 4.70 image in multi-boot. So, do you use DiSEqC switching? If so, do you suffer this probem: Can you switch channels, as...

Hi @Crusty Burke, I still use the link in my post above. http://www.satellites.co.uk/forums/dreambox-support-forum/72562-usual-places-dreambox-files.html#post824320 It still works but you do need to be registered at the mo. It's a bit 'daisy' on that, some days you do need to be registered...

He might have bought the Sea Lion from a pet shop! However, I think it will be better off in a Sea Life Centre rather than a Dreambox ;).