Hi
As the Analogue eurosport internation was shut down I bought a Ross disk and decoder from B +Q.
I have set it up and pointed it in the same direct as my old dish but i am not getting anything. When I scan for channels the highest signal i get is 40% (most are about 25%). I've tried both the new and old dish (which has a universal LN but no difference.
Also to set up the old dish I used a satellite finder and this worker very well. But when I try to use it I get nothing (on the analogue system even if you where way off you could still turn up the gain and get something).
The settings I'm using are
Astra 1H/1L/1
Lnb type Universal
LNB low 9750
LNB high 10600
22Khz Auto
DisEqc Disabled
LNB Power ON
Any suggestion?
Thanks
Steve
As the Analogue eurosport internation was shut down I bought a Ross disk and decoder from B +Q.
I have set it up and pointed it in the same direct as my old dish but i am not getting anything. When I scan for channels the highest signal i get is 40% (most are about 25%). I've tried both the new and old dish (which has a universal LN but no difference.
Also to set up the old dish I used a satellite finder and this worker very well. But when I try to use it I get nothing (on the analogue system even if you where way off you could still turn up the gain and get something).
The settings I'm using are
Astra 1H/1L/1
Lnb type Universal
LNB low 9750
LNB high 10600
22Khz Auto
DisEqc Disabled
LNB Power ON
Any suggestion?
Thanks
Steve