scooter123
Member
- Joined
- Sep 1, 2007
- Messages
- 25
- Reaction score
- 0
- Points
- 0
- Age
- 55
- My Satellite Setup
-
Echostar ad3600ipva
Technomate Tm5500cip
Sky+
Technisat DVB pci 2.3 & 2.6 running on XP & Vista with Prog DVB
1.5 prime focus dish on polar mount
Invacom C120 quad LNB
T Rex cam, Diablo cam & Matrix reloaded cam
Cas 3 plus programer
- My Location
- Derbyshire UK
Hi
I have a problem that is driving me mad.
I use a Clarke Tech HD5000c to record HD programs I want to keep to hard drive. I then transfer the recording to my PC & burn an AVC HD DVD to use on a Blu Ray player.
I have a Sky subscription & card which I use with a T rex cam in the Clarke Tech.
My problem is I can watch & record Screen 2 & all the other HD channels I subscribe to exept Ch4 & Screen1 on 11798H. On this transponder the signal strength bar keeps bouncing up & down causing the signal to break up.
I am feeding the reciever from a 1.5m dish so signal strength should not be a problem but just to rule out the dish or lnb I have connected the reciever to my Sky dish but the signal is just the same. The Sky HD box works fine on this transponder using either dish.
Sods law says that films I want to keep such as the Italian Job are shown on screen1.
Can anyone tell me if this is a problem with the Clarke Tech or is there something else interfering with the signal. I noticed that Anytime is on this transponder. Could this be the cause of the problem.
I have a problem that is driving me mad.
I use a Clarke Tech HD5000c to record HD programs I want to keep to hard drive. I then transfer the recording to my PC & burn an AVC HD DVD to use on a Blu Ray player.
I have a Sky subscription & card which I use with a T rex cam in the Clarke Tech.
My problem is I can watch & record Screen 2 & all the other HD channels I subscribe to exept Ch4 & Screen1 on 11798H. On this transponder the signal strength bar keeps bouncing up & down causing the signal to break up.
I am feeding the reciever from a 1.5m dish so signal strength should not be a problem but just to rule out the dish or lnb I have connected the reciever to my Sky dish but the signal is just the same. The Sky HD box works fine on this transponder using either dish.
Sods law says that films I want to keep such as the Italian Job are shown on screen1.
Can anyone tell me if this is a problem with the Clarke Tech or is there something else interfering with the signal. I noticed that Anytime is on this transponder. Could this be the cause of the problem.