Dish Signal issues

B

babai

Member
Joined
Feb 3, 2011
Messages
4
Reaction score
0
Points
0
Age
50
My Satellite Setup
Astra 19.2E and Astra 28.2 Azbox premium HD
My Location
Germany
i got a question regarding the Satellite frequencies thinghy. When i enter TP freq/Symbol rate,modulation manually, sometime quality of signal goes to zero,what does this means? i cant get the channels on that freq?? where as my quality of signal is 80% normally

Coz of this i am not able to get some channels.
 
Lazarus

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,086
Reaction score
8,673
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
It usually means you've entered at least one of the parameters wrongly!
 
satelliteman

satelliteman

Administrator
Staff member
Joined
May 7, 2007
Messages
12,039
Reaction score
387
Points
83
My Satellite Setup
See signature
My Location
Northants, Midlands UK & Lanzarote, Canary Islands
Cross reference parameters with flysat / kingofsat.
 
ralphmagno

ralphmagno

Regular Member
Joined
Jan 12, 2005
Messages
994
Reaction score
17
Points
18
Age
74
My Location
naples italy
hello
make sure the lnb in universal and 9.750/10.600 ghz
anynthing else is incorect and doing the math you may be missing 90% of the channels
then you must have the transponder freq,symbol rate and fec all must be loades if it asks for it.
otherwise you will get nothing and when you search it will find nothing.
also the alignment should be spot on and if all is set up you will find everything.
unless the lnb or cable or box is broke
ralph
 
Top