Hi all
first of all DO NOT USE EMEDIT !!!!! It's a very old version of JeEdit and it's no more supported.
The "error 02" mean "Model ID Not Matched" : this happens for one of the following reasons
1) data in HW,SW,Model are WRONG
2) you have not checked "Always use personalized data"
This settings tell the software to use always the data stored in HW;SW,Model id : if not checked every settings file,formware,and also key could not match with the current firmware version loaded in your receiver.
The problem of @sIiiS is due to a different problem : it happens when "starsat mode" is not checked. Infact Starsat firmware have different data structure (8 kbyte less than the other to save space for k_ys).
Of course, unfortunatly, I can only test few version of starsat firmware, so I'm not sure that EVERY firmware version has these differences.
Please report me your tests
Thanks alot
cu