HackSat Keys Downloader v5

[tonytr]

downloaded all time updated keys
mgcamd keys (SoftCam.Key AutoRoll.Key tps.au files)
evocamd keys (Keylist.txt and Autoupdate.Key files)
newcamd keys ( rsakeylist and keylist files)
gbox keys (nagra key file)
camd3 keys (camd3.keys file)

download this file and send in /tmp and use addons manuel on remote control for install (only dreambox 500 and 70x0)
h**p://www.skystar.org/redirect.php?dlid=1441&ENGINEsessID=de5090d04a26c4e5a5ece7b3bd0a3ade



enjoy

 

[ecallawevad]

Deos anyone know why it takes so long for a channel to show. If I switch to a Cinema channel for example, I can wait for around 3-5minutes before the channel comes up. Is the system searching for keys or something, if so why does it take so long? Is there some way of reducing the time?
Otherwise, I have to wait 5 minutes to see if I can view each channel, before seeing what is on. It only does this with some channels though

 

[v9oly]

It shouldn't take this long to clear,from downloading the keys, if you are talking about prem*ier then it's probally auto-updating - if you are using CCcam2.0.5 or mgcamd 1.27.

BTW hacksat key updater is upto version 7b now.

Regards,
Ollie

 

[mhku]

Have you tried restarting your emu after updating keys?

 

[ecallawevad]

Yes, tries restarting emu. It only happens on some channels such as muliviews. I think i need a better satellite
Does anyone know how to set up cardsharing?

 

[moosegoose]

hi i use mcamd 1.27 with gemini 4.2. hack sat works fine on prem can be hit and miss on multivision. i put it down to occasional glitches with hack sat and just accept thats how it is. ps u might be better off starting a new thread on card sharing or searching for previous posts.

 

[rolfw]

Works fine with Cccam as well.

 

[v9oly]

Yes, tries restarting emu. It only happens on some channels such as muliviews. I think i need a better satellite
Does anyone know how to set up cardsharing?

Mult*vision & T*S AU is down at the moment.

 

[ecallawevad]

I think its due to the dish I've got being too small to get a good reception on some channels. Multivision channels are apparently broadcast from a satellite which is further away, and therefore the signal is lower. So i've just bought me a 1m sat dish with multilnb holder and diseqc switch, hope to get it for the weekend.

Thx for suggestions

 

[Analoguesat]

I think its due to the dish I've got being too small to get a good reception on some channels. Multivision channels are apparently broadcast from a satellite which is further away, and therefore the signal is lower.

Err nope, TPS / MV broadcasts off the high power Hotbird cluster at 13E and those satellites are an easy catch here in south Scotland with an 80 cm dish. In fact they are an exceptionally easy catch on a zone 1 sky dish! (43cm)

 

[HB13DISH]

I think its due to the dish I've got being too small to get a good reception on some channels. Multivision channels are apparently broadcast from a satellite which is further away, and therefore the signal is lower. So i've just bought me a 1m sat dish with multilnb holder and diseqc switch, hope to get it for the weekend.

Thx for suggestions

As Analoguesat replied, MV channels are part of TPS on Hot Bird 13E, but they seem to be weaker than the other channels.
They tend to pixel and disappear entirely in the evenings, even with a 1.6m dish in the Middle East and this can be seen from the MV FTA promo channel.

 

[Analoguesat]

Lets point out this is not a problem in the uk

 

[tonytr]

hacksat keys downloader v8:
_http://www.skystar.org/redirect.php?dlid=2066
old versions is died
regards

 

[davinci]

Good morning guys from greece !!!
I have installed the latest version of hacksat(v.8)
but as a friend mentioned, the update in some channels (f.e polsat)is not immediate and i have to wait enough time so as the receiver can descramble the channels.With older versions of hacksat i didnt have this problem .
I think this is due to the fact that i use an older version of gemini (3.2) but i am not sure .
Regards

 

[HB13DISH]

Good morning guys from greece !!!
I have installed the latest version of hacksat(v.8)
but as a friend mentioned, the update in some channels (f.e polsat)is not immediate and i have to wait enough time so as the receiver can descramble the channels.With older versions of hacksat i didnt have this problem .
I think this is due to the fact that i use an older version of gemini (3.2) but i am not sure .
Regards

Good morning to you also morten,

Which CAM are you using?
Also, what is the memory status on your box?
It is always a good idea to upgrade to the latest Gemini image (now 4.2).
but first try to install latest CCcam 2.0.5 (06/02/08) from the Blue Button > addons > Gemini Server >
If you already have done this, then try the upgrade.

 

[davinci]

Thanks for your reply my friend ,
I already use cccam 2.05 but the problem insists .One more qwestion though ...When i want to update via hacksat ,i go and i choose from the list tha cccam tab ,do i have also to do it one more time in order to update the cw cccam choosing the cw cccam tab?

 

[HB13DISH]

Thanks for your reply my friend ,
I already use cccam 2.05 but the problem insists .One more qwestion though ...When i want to update via hacksat ,i go and i choose from the list tha cccam tab ,do i have also to do it one more time in order to update the cw cccam choosing the cw cccam tab?

Which release date? Latest is 6/2/2008

 

[davinci]

If you mean the cccam 2.05 release ,is the one with the second tps fix .

 

[HB13DISH]

I mean the latest from the CAMs list when you connect to the Gemini Server.
It shows in the description (in German) the date before you select to download and install.
But never mind. You seem to have the latest.

 

[dago]

I find that using any autoupdater a bit of hit and miss, as a rule I prefer
to update keys manualy, it also gives me the satisfaction that I done
it not my db.
regards.