Ok for the NOOBS :
How to make E2 bootable from Internal HDD.
with NLB image installed.
without Serial cable, only requirements are telnet and FTP access.
For telnet and FTP acces to youre relook i suggest RCC or DCC downloadble here :
_http://www.denktenk.com/modules/wfdow ... /visit.php?cid=13&lid=432
You also need the apropriate usb_config.welcome.img (provided by dexter, first post)
Now, flash the image (Use USB or flash with webiff.)
that matches your hardware, 900,910 or 9000 img.
this will enable the fw_setenv to work on you nlb installed image.
Now, Download a usable E2 package like :
_http://www.denktenk.com/modules/wfdow... visit.php?cid=50&lid=1196
extract this package until you have : Enigma2 SifTeam 0.2.0 mod PKT beta 3.0b.tar.gz
rename this file to : Enigma2.tar.gz
Now use RCC to FTP this file to youre relook's /media folder
now use RCC telnet and type :
cd ..
cd /media
tar xvzf Enigma2.tar.gz (this will take a while)
sync
sync
fw_setenv menu_1 'setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500";setenv bootcmd "bootm a0060000";save;boot'
fw_setenv menu_2 'setenv ipaddr 192.168.2.5;setenv gateway 192.168.2.1;setenv netmask 255.255.255.0;setenv bootide "run bootargside;ide reset;ext2load ide 0:2 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargside "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sda2 rw rootfstype=ext2 init=/bin/devinit ip=$ipaddr::$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";setenv bootcmd "run bootide";save;boot'
---------------------------------------------------
In the last command (fw_setenv_2) you need to update ip adresses to match your network. othewise E2 is not accessable from network.
ipaddr = Relook IP
gateway = youre routers gateway (often 192.168.1.254 or 192.168.1.1)
And you can now boot DGS flash(hold down 1 on remote during) or E2 (hold down 2 on remote during)
remember to change ip adresses above.
After first boot of E2 you need to set your DNS @Ip settings, otherwise E2 wil not connect to internet and bleu panel does not download emu's etc... ...