How To Install Omnikey Reader On Dreambox

woodseaves

Member
Joined
Jul 22, 2008
Messages
43
Reaction score
0
Points
6
Age
79
My Satellite Setup
Dreambox 8000HD S, Dreambox 7025i, Fibo 1.2 fixed on 7W, 90cm Motorised System.
My Location
Hereford
When the file newcs.mips.pcsc is ftp'd to usr/bin and renamed has it got to be renamed the same as the newcs you are running, eg I am running newcs 1.66 and cccam 2.1.1 as I do not know how to download 1.67 if it is not on the blue button. I have tried both methods (renaming to 1.66 and 1.67) but with no success. I have the white card running fine now both locally (internal LAN) and Externally (dns). I am desperate to get it working in the omnikey. this is my newcs 1.66 for you to look at and see if there is anything obviously wrong:
<newCSconfig>
<globals>
<listening-ip>192.168.1.**</listening-ip>
</globals>
<readers name="Card Readers">
<device>
<name>Lower</name>
<type>Sci</type>
<node>/dev/sci0</node>
<mhz>357</mhz>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>yes</blockga>
<boxkey>********</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>12000</newcamd_port>
<priority>round</priority>

</device>

<device>
<name>Upper</name>
<type>Sci</type>
<node>/dev/sci1</node>
<mhz>357</mhz>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>yes</blockga>
<boxkey>********</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>12001</newcamd_port>
<priority>round</priority>

</device>
<device>
<name>USB</name>
<type>pcsc</type>
<node>0</node>
<mhz>357</mhz>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>yes</blockga>
<blockc0>yes</blockc0>
<boxkey>********</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>12002</newcamd_port>
<priority>round</priority>
</device>


</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>2</emm>
<ecm>3</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>*******</name>
<password>********</password>
<au>off</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>

<user>
<name>********</name>
<password>*********</password>
<au>off</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
<user>
<name>********</name>
<password>********</password>
<au>off</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>

</newcamdserver>

<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>admin</name>
<password>admin</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
</newCSconfig>


I've blocked out the users, two are internal one external all different usernames and passwords and all working OK. I am using a DM 7025.

I have followed all the instructions at the beginning of this thread, this is a copy of the newcs 8080 to see if this helps

Newcamd Port: 12000 - CAID: 0000 - Reader: 0 (Lower)
ID Username Status Ok ECM Bd ECM EMM Hostname Client Spdr AU SO
02 DM7025 Offline 0 0 0 Offline Offline
03 DM8000 Offline 0 0 0 Offline Offline
04 andiprem Offline 0 0 0 Offline Offline

Newcamd Port: 12001 - CAID: 0963 - Reader: 1 (Upper)
ID Username Status Ok ECM Bd ECM EMM Hostname Client Spdr AU SO
02 DM7025 00d 11:21:43 0 0 0 192.168.1.** CCcam
03 DM8000 00d 11:22:01 0 0 0 192.168.1.** CCcam
04 ******** 00d 00:21:31 0 16 0 **.***.***.** CCcam

Newcamd Port: 12002 - CAID: 0000 - Reader: 2 (US:cool:
ID Username Status Ok ECM Bd ECM EMM Hostname Client Spdr AU SO
02 DM7025 Offline 0 0 0 Offline Offline
03 DM8000 Offline 0 0 0 Offline Offline
04 ******** Offline 0 0 0 Offline Offline


Readers Status

Status CAID Mhz Resets ECMs Net ECM Node Reader
0000 357 0 0 0 /dev/sci0 0 (Lower)
0963 357 0 16 0 /dev/sci1 1 (Upper)
0000 357 0 0 0 0 2 (US:cool:
there is no card in the usb, but if there was it wouldn't show.

regards
 

andel

Regular Member
Joined
Jun 16, 2009
Messages
275
Reaction score
0
Points
16
Age
49
My Satellite Setup
DM800, DM600, Technomate Diseqc Motor, 90cm Dish
Panasonic 42&quot; Plasma 1080p
Pioneer VSX-LX70 Amp
Sky HD
B &amp; W 5.1 Speaker Setup
Popcornhour Media center
Xbox 360
My Location
Watching T.V in the UK
Ok lets try to start it step by step.
1. First google newcs-1_67RC1 and download the top link
2. Rename newcs.mips.pcsc to whatever you want but lets say its newcs_1.67.pcsc and ftp to /usr/bin and chmod to 755
3. Using the blue button download/install CCcam 212
3. Use the blue button to select the common interface as your default cam (this will kill the CCcam)
4. Now I suggest you do a hard reboot.
5. Telnet to the DM and use.... /usr/bin/newcs_1.67.pcsc -C /etc/tuxbox/config/newcs.xml (the first path is pointing to the newcs bin, the -C is the switch to point to the path of your newcs.xml)
6. Once that says ready to go and you can access your newcs web interface telnet again and use... /usr/bin/CCcam_212 -dv (to start CCcam)

Hopefully I've done this correct from memory and you should be up and running. Report back and let us know
 

woodseaves

Member
Joined
Jul 22, 2008
Messages
43
Reaction score
0
Points
6
Age
79
My Satellite Setup
Dreambox 8000HD S, Dreambox 7025i, Fibo 1.2 fixed on 7W, 90cm Motorised System.
My Location
Hereford
Thanks Andel,

step 5 just puts me in a loop.
 

andel

Regular Member
Joined
Jun 16, 2009
Messages
275
Reaction score
0
Points
16
Age
49
My Satellite Setup
DM800, DM600, Technomate Diseqc Motor, 90cm Dish
Panasonic 42&quot; Plasma 1080p
Pioneer VSX-LX70 Amp
Sky HD
B &amp; W 5.1 Speaker Setup
Popcornhour Media center
Xbox 360
My Location
Watching T.V in the UK
what do you mean by it puts you in a loop?

after you telnet the command below what output are you getting?
Is your newcs.xml located in /etc/tuxbox/config ?

Code:
/usr/bin/newcs_1.67.pcsc -C /etc/tuxbox/config/newcs.xml
 

woodseaves

Member
Joined
Jul 22, 2008
Messages
43
Reaction score
0
Points
6
Age
79
My Satellite Setup
Dreambox 8000HD S, Dreambox 7025i, Fibo 1.2 fixed on 7W, 90cm Motorised System.
My Location
Hereford
Hi
I can't give you the output the output justkeeps scrolling round and round. I have gone through the whole lot again but the result is still the same.

Kill NewCS in the linux server, how do I do this?

If I put the card in the omnikey it recognises it and shows entitlements but it does not free up the channels.

Well, I've tweeked and tweeked, shutdown restarted, re-named etc. You name it i've done it. All worth it though, Omnikey working. Good eh.

Thanks for reading and helping

Regards
 

andel

Regular Member
Joined
Jun 16, 2009
Messages
275
Reaction score
0
Points
16
Age
49
My Satellite Setup
DM800, DM600, Technomate Diseqc Motor, 90cm Dish
Panasonic 42&quot; Plasma 1080p
Pioneer VSX-LX70 Amp
Sky HD
B &amp; W 5.1 Speaker Setup
Popcornhour Media center
Xbox 360
My Location
Watching T.V in the UK
If the common interface is the default cam then newcs shouldnt be running on reboot.
What happens if you telnet and type dmesg?

What image are you using?
 

woodseaves

Member
Joined
Jul 22, 2008
Messages
43
Reaction score
0
Points
6
Age
79
My Satellite Setup
Dreambox 8000HD S, Dreambox 7025i, Fibo 1.2 fixed on 7W, 90cm Motorised System.
My Location
Hereford
Hi Andel

Sorry I didn't see your post, I've been updating in the previous post. I renamed Newcs.xml then rebooted with the common interface as default. When all was running I renamed the newcs.xml to it's proper name, then I used the code ./newcs_1.67.pcsc -c /var/tuxbox/config/newcs.xml. This got things going. I then started Cccam 1.1.2. With the card in the omnikey I had to change the Port in the Cccam to reflect this ie port 12002. The omnikey is now working fine. Thanks to everyone who helped, I would not have done it without you. You can guess from my posts that I am a complete amateur.

regards
 

roaaul

Member
Joined
Dec 26, 2008
Messages
6
Reaction score
0
Points
0
Age
55
My Satellite Setup
dream 7025+ s-c
My Location
blighty
anyone had any success with a polsat card in the omnikey?
boxkey & rsa are in the xml its working on dev/sci0 but is freezing every 40-60 secs no matter what freq or write delay used
in the mpcs config it says [cs357x] = port number, i take it this means clock speed 357 xtal?
as the omnikey uses the iso standard to get the vcc freq etc i was thinking it might be an issue there?
the card is detected in newcs info but no caid is shown mpcs should sort that but no luck
using cccam/mpcs/pcsc/newcs in one pack
cccam is 2.0.4 newcs is 1.67 mpcs and pcsc are the latest/only versions
any info on polsat with an omnikey is appreciated
sorry for thread hijack
thought this thread the best place

R
 

B16MCC

Dreambox Gimp & Coder
Joined
Nov 16, 2005
Messages
1,562
Reaction score
8
Points
0
Age
51
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR &amp; DM 800 HD ---
Motek SG2100 &amp; Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full &amp; 24&quot; Apple iMAC ----
My Location
/var/tuxbox/config
Does the CAID show when its in the internal or not ?
 

roaaul

Member
Joined
Dec 26, 2008
Messages
6
Reaction score
0
Points
0
Age
55
My Satellite Setup
dream 7025+ s-c
My Location
blighty
hi m8
yeh it shows 1803 on the internal no probs
just dont get the caid in newcs info in the o/key
mpcs seems to be working fine internal its just the transition to an o/key has stumbled it somehow
thats why i wondered if the [cs375x] needed changing to something omnikey related

R
 

WildBit

Regular Member
Joined
Feb 9, 2008
Messages
185
Reaction score
0
Points
16
Age
62
My Satellite Setup
-DM800 fixed on 28.2-quad
-DM7020 motorized
-Skystar HD2 motorized
-Cards&amp;Cams&amp;Cas
My Location
Ireland
strange... similar behaviour of the white sly card in the smargo reader. It all looks good but no caid. The problem was the reader of course
 

bob808

Member
Joined
Sep 21, 2009
Messages
6
Reaction score
0
Points
0
Age
45
My Satellite Setup
Astra 28.2, PC with 2 DVB-s2 tuners and a DM800
My Location
Hampshire
I have a problem with newcs... I have the omnikey installed and recognised, and setup in newcs, but when I try to launch newcs it shows the following, but stops at 'process id is...' so it doesnt get as far as setting up the httpd interface.

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:57:27
Reading Config file from /var/tuxbox/config/newcs.xml
NewCS is trying to bind to IP: 192.168.1.68
[ 22:56:17 ] [ Box detect ] Box type 7 (Dream Multimedia (MIPS) HD Box)
[ 22:56:17 ] [ Config ] Option <Seca-PPV> for device 0 (OmnikeyUS:cool: not present,
defaulting to NO
[ 22:56:17 ] [ Config ] Pincode for device 0 (OmnikeyUS:cool:: 0000
[ 22:56:17 ] [ Config ] 0 ECM priority: round
[ 22:56:17 ] [ httpd ] httpd-user: bob808, password: , accesslevel: stats
[ NewCS ] Process ID is: 29484


Here is my newcs config... has anything obvious been missed?

Config removed.
 

bob808

Member
Joined
Sep 21, 2009
Messages
6
Reaction score
0
Points
0
Age
45
My Satellite Setup
Astra 28.2, PC with 2 DVB-s2 tuners and a DM800
My Location
Hampshire
ignore that - I used the xml and cfg generator, and added in the section for the omnikey and now it works...

I have 1 last problem now, and that is getting it to auto start when the dreambox reboots. I am using nabilosat blackhole, and I have setup a camscript, but when I run it neither newcs or cccam start. Here is the script, what have I done wrong? Otherwise what do I edit to force it to run this on boot?

#!/bin/sh

CAMNAME="NewCs_1.67/CCcam_2.1.2"

remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
remove_tmp
/usr/bin/newcs_167 &
sleep 10
/usr/bin/CCcam_212 &
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
killall -9 newcs_167 CCcam_212 2>/dev/null
sleep 1
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac

exit 0
 

B16MCC

Dreambox Gimp & Coder
Joined
Nov 16, 2005
Messages
1,562
Reaction score
8
Points
0
Age
51
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR &amp; DM 800 HD ---
Motek SG2100 &amp; Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full &amp; 24&quot; Apple iMAC ----
My Location
/var/tuxbox/config
I've been investigating nabilo cam scripts because there does seem to be something a little strange. I too have had the same problem where the emu's don't seem to respond to the script when started from the blue panel. As I moved to a ubuntu pc my research has fell off if I'm honest but I would like to know properly how the cam scripts work in Nabilo. Please do report back if you work it out, as will I of course.
 

woodseaves

Member
Joined
Jul 22, 2008
Messages
43
Reaction score
0
Points
6
Age
79
My Satellite Setup
Dreambox 8000HD S, Dreambox 7025i, Fibo 1.2 fixed on 7W, 90cm Motorised System.
My Location
Hereford
Hi all,

the card is still working in the omnikey, however the picture is not very stable, do you think it's the omnikey or is there another cause? Sometimes I have to take the card out and replace it because the picture freezes, any ideas why. I haven't seen anybody else with similar symptoms so I'm guessing it's something I have done or not .


Regards
 

WildBit

Regular Member
Joined
Feb 9, 2008
Messages
185
Reaction score
0
Points
16
Age
62
My Satellite Setup
-DM800 fixed on 28.2-quad
-DM7020 motorized
-Skystar HD2 motorized
-Cards&amp;Cams&amp;Cas
My Location
Ireland
Hi all, got the reader today. Had it running in less than an hour and I think just in time because when I took the card out of the internal reader, IT WAS VERY WARM. The ps3 fan helps but it doesn't solve the problem... anyway as mentioned it's been running for a couple of hours and I have had no problems at all so far.

Just follow the simple procedure outlined by B16MCC at the start of this thread! Also, changing the frequency setting in newcs should not have any effect (omnikey reader) if it truly follows the ISO standard, gets it directly from the card.

LIGHTNING FAST!

19:58:03.124: CCcamN 0: ECM [050B][0963/00000000] Pro (0.008)
19:58:03.254: CCcamN 0: ECM [050B][0963/00000000] Pro (0.130)
19:58:03.255: [00] SendDCW Even: 1183A337F0E8C29A:
19:58:10.593: CCcamN 0: ECM [050B][0963/00000000] Pro (0.138)
19:58:10.594: [00] SendDCW Odd: :9F4F2F1D47B9EDED
19:58:18.728: CCcamN 0: ECM [050B][0963/00000000] Pro (0.140)
19:58:18.729: [00] SendDCW Even: 7A305F09BD1DBA94:
19:58:27.005: CCcamN 0: ECM [050B][0963/00000000] Pro (0.135)
19:58:27.006: [00] SendDCW Odd: :B7B65FCCC6A074DA
19:58:35.075: CCcamN 0: ECM [050B][0963/00000000] Pro (0.141)
19:58:35.076: [00] SendDCW Even: EB8367D5A495518A:
19:58:42.257: CCcamN 0: ECM [050B][0963/00000000] Pro (0.132)
19:58:42.258: [00] SendDCW Odd: :63FF59BB13070B25


Really is worthwile
Server ECM Req ECM Resp % Hits Routed Pkgs Broadcasts
Newcamd 439 439 100.0
 

moelikepie

Regular Member
Joined
May 28, 2009
Messages
69
Reaction score
0
Points
0
Age
37
My Satellite Setup
iMac 20&quot;.
Custom HTPC.
DM800 HD.
Full Sky HD Irish Package.
My Location
ireland
hi guys,

has anybody set up 2 omnikey readers on the one box?

i followed this guide and got my first omnikey set up and working with a white irish sly card. i then got a uk FTA card (for c4hd) and it works on my server dm800 no probs via the same omnikey reader.

so i bought a second omnikey and now, here's where the problems start! on my server dm800, i am watching a channel cleared via my irish card and all is fine. i then change to c4hd, slight pause and it works fine. i have 2 n-lines in my cccam.cfg each with the different ports for each omnikey. i then have one c-line for a client box in a different room in the house. if im watching a channel cleared by the irish card on one box, and a channel cleared by the uk card in the other box, then they both start to freeze up. if i put them both on a channel cleared by the same card its all fine.

it seems that the server box cant cope with the 2 omnikeys for some reason... is there any thing i can do to make both cards work without freezing?

sorry this is a bit long winded!!

cheers
adam
 

joy123

Member
Joined
Sep 19, 2008
Messages
28
Reaction score
0
Points
0
Age
43
My Satellite Setup
dreambox 500s
dreambox 7025+
dreambox 800hd
lat: 53:29:16N (53.48764)
lon: 8:34:03W (-8.56745)
My Location
IRELAND
hey, just wondering does anybody tried to setup omnikey 3111 serial reader with dreambox 500s yet? i cant use usb card reader :(


or any other serial card reader to read new white sly card?
 

woodseaves

Member
Joined
Jul 22, 2008
Messages
43
Reaction score
0
Points
6
Age
79
My Satellite Setup
Dreambox 8000HD S, Dreambox 7025i, Fibo 1.2 fixed on 7W, 90cm Motorised System.
My Location
Hereford
Now that MgCamd has entered the equation, are there any differences in the newcs?

Regards
 

satter

Member
Joined
Apr 7, 2009
Messages
26
Reaction score
1
Points
0
Age
46
My Satellite Setup
Vu duo
My Location
Berlin
Do all omnikeyreaders work on the DM? Or just the 3121?

I saw cheaper omnikey readers
 
Top