Keys via remote control

[bibams5]

Does anyone know how can i input the codes via remote control to opentel reciever

Hi there,
can u send me the way to enter the keys via remote to my mail hyogeshatrediffmail.com.

Thx in advance.

 

[acer4000]

put a parental lock on the menu. and then go to the menu > installation and enter the mastercode 0937 here u will find a code section wer u can enter ur keys.;)

 

[karouk]

I have found an excellent little program called: Downloader 2.5
Whenever any of the encryption codes change, I connect to the Internet and run Downloader 2.5. In a few seconds all the changed channel keys are downloaded .

My only problem is how to use the downloaded keys to update my CAM using the remote control )(-red .

I accidently learned that when I receive the Polsat 13E Nagra Key "***********************", I would use the remote control to enter "**********************" instead. I don't know why, but it works. However, I have no clue on how to enter the other Nagra,Seca, Viaccess, and Conax codes using my remote control. Can anybody explain/help pleeeeeeease.

Ossama Haggag

Keys removed by admin, please observe the rules.

if you tell me the reciver models i tell you how to enter the code

 

[AbuAhmedAli]

I found a trojan in this software by my antivirus programme

 

[Prophessor]

Same here.

 

[pedja_pg]

Please, someone help me??
I have topfield 5000Ci, and i want to input the key for D+ by remote control.
I know how to get there, (menu, 121, edit codes, ngravision). But I don't know what excatly to input?????? And what to do after it??
Thank you very much

 

[Hermann]

i was looking for members who use the pas 7/10 orbital position in the forum, but it is difficult to find, my problem is: i use a dstv multichoice africa decoder with a irdeto 2 smart card , and i would like to see some encrypted channels, can some body give me the keys ( to insert via remote control) to or irdeto 2, or connax or nagravision, my sattelite is pas 10 , 68.5E.

Is it possible?

my email box:
electrronika:-shhyahoo.com.br
O-Ha

 

[Analoguesat]

You can for get anything in Irdeto2 and Conax. They are official subs cards or card sharing only at the moment.

 

[eidwisam]

hi, does anybody know wether I can enter a key for patching viaccess using the remote control for echostar DSB 707 FTA

 

[richard_s]

hello is it possible to input keys into a strong srt6155 using the remote. if not what program do i need to input them by pc?

thank you in advance

richard

 

[A a - S s - A a]

Thank U

What Is The Code For Irdeto

Plzzzzzzzz

 

[harrix6969]

[]Can you tell me please where I can get this Downloader 2.5
Thank You[/quote]

Can U tell me where I can get this downloader 2.5

 

[saidfawzy]

I will tell you as far as I know
First you have to went to the code page of your receiver
for example if it was ASTRA you will go to STB menue then press 1234
if it was ASTRA you will press 121 .. and so on

Second you have to find the prvider of the channel you want enter the key for

for exampl SRG group its provider is 00940 ... you will find it repeated in every line of this group inside like this

..... 00940 07 xx xx xx xx xx xx xx xx
..... 00940 08 xx xx xx xx xx xx xx xx
..... 00940 09 xx xx xx xx xx xx xx xx
..... 00940 0A xx xx xx xx xx xx xx xx

the 00940 is the provider

then try to change the keys for the ID .. the Id is the upcomming two digit 01 , 09 0A and so on

it depends on the receiver you use the instructions will be by the end of the page

some reveiver you have to chose the line of the key you want to change then press enter and then you edit it using numbers and letters from a menue appears on the screen

others you can put keys directly in the same page using numbers from the remote controle and up and down arrow to show A, B , C and so on

Some remote you can enter it in dicimal ... in this case the 2 didgit hx number you have must be converted into decimal first using your scintific calculater in the computer for exampl

I forget to tell you that there is a page for every kind of code Veccess , Negravision and so on .. using the instruction and the remote contrle key yu can change the page tell you find the code page you want

OK

waiting for any question

Thanks
Said Fawzy
Egypt

 

[Excelling]

Ok, what about if you have a 32 digit key that I want to enter but I only have the hex key in the menu to enter (Only 16 digit) ??
My receiver is a truman 7000.

Thanks much for your help

 

[Razor]

You need a dec to hex converter, I had a small file somewhere If I fine it I will post it here.

dec is 4 numbers but when you convert to hex you get d1 or a8 and so on.

 

[Excelling]

You need a dec to hex converter, I had a small file somewhere If I fine it I will post it here.

dec is 4 numbers but when you convert to hex you get d1 or a8 and so on.

Is there a hex to dec ?? because I can enter a 16 digit code, but I cannot enter the 32 O-no
And I see that there are alot of 32 digits keys out there!

 

[Razor]

I had a look for my converter, but it seems to be gone.

Maybe someone here has one and might post it?

 

[rolfw]

Try this http://www.satellites.co.uk/php-bin/forum/showthread.php?t=9926&highlight=hex+dec

 

[got2byou]

hi guys, could anyone please help me where can i download softwares related to Technosat T-888/2Mb.Thank you so much

 

[Sardia]

Can anyone tell me how to enter keys with remote control on starsat SR-X3100CU Super...thanx

hi with remote enter Menu Stand on Instalation then enter 1234.
Or u can open instalation in some Model and you can find "Input Code"
then the Pop Up letter and number will come out
choose your Encryption method and enter Key Followed with the rest 16 Hex number