Qos Bandwidth settings

[Archive-8]

I have been playing in my R7000 router, with the qos bandwidth settings.

I am getting conflicting reports of how much bandwidth I should be setting the uplink and downlink bandwidth.

All the guides I can find have said I should you 80% - 100% of my downlink and 85% - 100% of my upload.

The settings below are based on my lines ip profile.



Can anyone help me with this please.

Thanks.

 

[Terryl]

Here is a nice tutorial that may help things out a bit.

How to Use Quality of Service (QoS) to Get Faster Internet When You Really Need It

 

[Archive-8]

Here is a nice tutorial that may help things out a bit.

How to Use Quality of Service (QoS) to Get Faster Internet When You Really Need It

Thanks I will have a read in a bit :-)

 

[Archive-8]

After a lot of head banging I have finally found the problem, I was getting confused with bits and bytes

Now I have found the right settings

To work out the qos value you need to run a Speedtest (ookla Speedtest)

So you get a value in Mbps.

Example:- 72.9mb x 8000 = 583200 download

18.45mb x 8000 = 147600 upload.

Now I need 85% of my bandwidth

Download 583200 - 15% = 495720
Upload 147600 -15%= 125460

And so far my ping time has also reduced from 14 to 10 on the pc and from 16 to 14 on the wifi

 

[Analoguesat]

Now I need 85% of my bandwidth

Can I have the other 15% - that would be better than what Im getting atm

 

[Archive-8]

Can I have the other 15% - that would be better than what Im getting atm

Apparently the gamer/voip settings use 75% or less on the qos.

So I have been told it's also reduces the ping time.