Samsung tv connecting Freesat

K

Krisn19851972

New Member
Joined
Feb 4, 2023
Messages
1
Reaction score
0
Points
1
Age
52
My Satellite Setup
Freesat
My Location
Portsmouth
Hi can any body help I have a sky-hd dish and 2 Samsung tv both of which have Freesat tuners built in when I connect my dish straight to the tv downstairs picks up channels no problem I then disconnect it and connect it straight to tv upstairs again all channels no problem heres when I get the problem if I try to use a splitter so I can have the dish connected to the downstairs and upstairs at same time it will only work on one tv the other says no signal any help would be great
 
ozumo

ozumo

te wo tsuite
Staff member
Joined
May 26, 2020
Messages
5,206
Reaction score
2,610
Points
113
My Satellite Setup
Raven mk2 zone 2 x4, Channel Master: 90cm x3, 1.2m x2, 1.8m PF. CM polar mount x2, Az/El x3.
My Location
South Durham
How many outputs does the LNB on the dish have? Each TV will require it's own feed, splitting one won't work as there are four separate combinations of voltage + 22kHz tone sent to instruct the LNB to send the required set of frequencies to the tuner, and only one combination can be used at a time.

If you only need to use one television at a time you can use a manual A/B switch or a priority switch.
 
Top