Vipersan
Emmett Browns Ghost
- Joined
- Jun 29, 2009
- Messages
- 10,918
- Reaction score
- 6,663
- Points
- 113
- Age
- 66
- My Satellite Setup
-
IP9000HD +
TD110 Dish and TD88 Dish in Tandem
66°East to 60°West.
AZbox PrmHD + OpnbxS9HD + Skybox + DrHD F15
2x VboxII AZ-EL
2 m+ Alcoa PF + BSC421 C-Band lnbf...
+SS2/TwHnS2-3200 pci/TBS6925 pci
1.5 Fortec Star -Gbox - HtoH Ku/Ka/C
- My Location
- UK
Hi friends ..
Prior to making changes to my motor/positioner system I need to make sure the AZbox can accomodate the changes I'm about to make ..
So far I've not used the AZbox to drive my V-box ..as it has always been in the same room as the AZbox ..so have always used the remote control to drive the dish via the Vbox.
So for the first time since I got it I now want to set the AZbox up to drive a Vbox positioner
diseqc 1.2
All satellite positions are already configured and stored so I want to manually enter the positions with a suitable editor.
That way I don't make changes which will affect the other receivers in my setup ..
In other words for example I have 55 west set already in the Vbox as position 19 ..
all other receivers know this and so can drive the dish to 55West..
I now want to edit/enter position 19 into the AZbox so it too knows where to send the dish.
I don't have a suitable editor to do this for my AZbox ..
can anyone help either by recommending one (usb stick or networked) or better still ...upload one for me.
Appreciated
VS
;)
Prior to making changes to my motor/positioner system I need to make sure the AZbox can accomodate the changes I'm about to make ..
So far I've not used the AZbox to drive my V-box ..as it has always been in the same room as the AZbox ..so have always used the remote control to drive the dish via the Vbox.
So for the first time since I got it I now want to set the AZbox up to drive a Vbox positioner
diseqc 1.2
All satellite positions are already configured and stored so I want to manually enter the positions with a suitable editor.
That way I don't make changes which will affect the other receivers in my setup ..
In other words for example I have 55 west set already in the Vbox as position 19 ..
all other receivers know this and so can drive the dish to 55West..
I now want to edit/enter position 19 into the AZbox so it too knows where to send the dish.
I don't have a suitable editor to do this for my AZbox ..
can anyone help either by recommending one (usb stick or networked) or better still ...upload one for me.
Appreciated
VS
;)