Sky UK card not working in DM800 Card Reader

[tomthebomb1968]

Hi Sharkadder. While my sky package is not HD I am a"friend" of someone who has HD and uses Gemini 3.8 along with the 2 files from my earlier post. He reports that HD is clearing on his 800 from internal reader.

 

[Sharkadder]

So can you ask your friend if the CCcam keeps the HD card alive and if i have 2 cards, do they need to be done from separate boxes? I've heard people say you do need them, then i've heard other say that it's rubbish and you can do it without.

Thanks

 

[B16MCC]

Guys my SkyHD card is in a smargo reader and CCcam keeps it alive no problem. I couldn't say how it may work if used in the internal reader. Bare in mind when using the internal reader the card is totally controlled by NewCS. CCcam is simply a client of NewCS as it would be if you where sharing from someone else. NewCS is responsible for keeping the card alive. If it fails to update the problem lies with NewCS.

Sharkadder - No box ID needed in NewCS.
Simply setup NewCS as standard.
Add a user using the web interface.
Edit your CCcam.cfg and add the N line to connect to NewCS using the user details you just added.

Having to change cams in order to catch an update is simply out of the question if you're sharing. I know for sure my peers would be enquiring why the server was down after a few hours downtime.

 

[harshy]

strange my cardreader has stopped recognising the sky card tonight, I've got the newcs.xml file and its still running ccam 2.09, but it didn't work

 

[hans71]

Hello tomthebomb1968 in your newcs.xml file is this adr: 192.168.0.4
now the question is this the ip-adr from the dreambox ????


please answer me i need to know :-newb


greetings Hans71

 

[dominus]

Guys my SkyHD card is in a smargo reader and CCcam keeps it alive no problem. I couldn't say how it may work if used in the internal reader. Bare in mind when using the internal reader the card is totally controlled by NewCS. CCcam is simply a client of NewCS as it would be if you where sharing from someone else. NewCS is responsible for keeping the card alive. If it fails to update the problem lies with NewCS.

HI, so if I have a smargo reader I do not need to place the sly card in the orginal box? Does it receives the keep alive signal? Also do I just need cccam?

thank you for help

 

[LViieira]

try CCAM 2.0.4

 

[heracle75]

Hi, sorry to kind of "gate crash" this thread but my friend is having a little trouble with sky HD card on his dm800, here is what he has done so far:

He downloaded the latest enigma2 version of Gemini for his dm800, Gemini flashed fine and he downloaded CCcam. Again CCcam was working fine on how it should work apart from 1 thing, i.e. It was all connecting fine to everything apart from reading his sky uk hd card.

Anyways me and him thought that he may have to use newCS, so we looked into new cs, put 1.60 onto the box and enabled the emu CCcam with newCS 1.60 and still no joy, the card would not read, it kept coming up as unknown card.

Anyways I then realized for newCs 1.60 you need to add in the box number, so he tried that and it still never worked. I then checked a popular dreambox forum and found that 1.62 of newCS was available, in this version no box number is needed, so he downloaded engima2 version of that and he couldn't figure out how to enable it with CCcam as it wasn't in the cam selection list.

We then thought ok, since me and him have both used CCcam in the past and not newCS it could of been the N lines that were the problem, again we checked and checked and the N line looked fine which was to be linked to the CCcam.cfg file.

I then noticed that Niablosat image came with CCcam 2.0.9 and NewCS 1.62 as a package from the green button, so he flashed with niablo image (the latest one), downloaded the CCcam 2.0.9+NewCS 1.62 pack and it eventually read the card.....however no HD channel would open with his card.


So my question is this, has anybody got a sly uk card working with the 800 on Gemini and What settings should he be using? If it does work on Gemini then how does he get his box to recognize the NewCS 1.62 for enigma2? Also the other point is, if this isn't currently possible due to support, is they any reason why Niablo image will unlock the normal SD channels but not the HD ones?

Just to clarify then, he has a sky uk HD card, it has tried CCcam 2.0.9+NewCS 1.60 on Gemini and no look, he tried installing 1.62 on Gemini and it's not in the emulator list. But yet the card works for SD channels only on latst version of Niablo image but will not clear HD channels.

Thanks

0961 work in 800HD gemini soft for me at newcs_1.60 at 8mhz. i update it with mgcamd once at month without need boxkey. also working newcs_1.60+cccam_2.0.9 but no update in this case.
is anyone try to read new 0963 cards, is posible to read?

 

[dominus]

Hi. I am having some probems setting up the smargo reader on my 800. I have done all as requested but still not opening card (NDS SKY on CCCAM).

Nabilo 0.5

The smargo has a light (green) flashing when connected to the dm800 and with the card inside

Settings:

SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4500002

Any help os much appreciated

 

[sonic1]

SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6800000

Add these two lines and it will work providing you have made the required changes to BH 0.5

Edit the file bootup in the folder  /ect/init.d

you add:

echo 90 > /proc/progress
modprobe ftdi_sio

Extract the attached file and inside you will see a nab.tgz file, ftp this file to tmp and then do a manual installation via addons.

 

[mattitk]

I am thinking of buying viasat hd package, it is also nds system, so does anybody know if it works with same principles in dm800 as sky hd packages?

 

[Turok]

Hello!
no,Viasat,is Using Like a tunnel system,on his cards!
using viaccess id,so that the old stbs are all compatible!

 

[mattitk]

Hello!
no,Viasat,is Using Like a tunnel system,on his cards!
using viaccess id,so that the old stbs are all compatible!

So is it possible to get work with dm800, i have heard that sd channels are working, but hd channels are more challenging, any info

 

[walshy5050]

hello to everyone ive been reading this post as i carnt get my s** card to clear i have newcs 165/cccams2.0.11 installed if i down grade to the version that is i this post and use the cccams config will this be the fix many thanks

 

[tomthebomb1968]

hello to everyone ive been reading this post as i carnt get my s** card to clear i have newcs 165/cccams2.0.11 installed if i down grade to the version that is i this post and use the cccams config will this be the fix many thanks

Which Image are you using? CCAM 2.05 and NewCs 1.62 seems to be the most favourable combination. I have the Zip file here, all you do is extract them and ftp them over to your 800. Replace the ip address in the NewCsxml with your DM800 ip

 

[tomthebomb1968]

Here you go

_http://rapidshare.com/files/190078950/CCm205.rar.html

 

[walshy5050]

thanks for the reply i will try this later

 

[walshy5050]

hi tomthebomb1968 i have ftp all the files over and edited newcs cam with the ip address of my dreambox done a complee shutdown and restart but still no joy

</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile/>
<console_options/>
<file_options/>
[COLOR="Red"]<udp_host>192.168.0.5</udp_host>[/COLOR]
<udp_port>1000</udp_port>
<udp_options/>
<tcp_port>3001</tcp_port>
<tcp_options/>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>NewCS</name>

 

[tomthebomb1968]

What image?

 

[bboyplo]

Guys (or girls).. I am currently using Nabilo 0.6 with my DM800 with the NewCS1.65/CCam2.0.11 package obtained from the addons feature. I updated my Config.cfg (n-line) and newCS.xml with the one given earlier on in this thread.

I am currently trying to get my Dbox to work with my UK sky card.

Out of pure luck after restarting my Dbox serveral times and waiting for 10 mins on a encrypted channel it WORKED!
(please look at CCam_Working/2/3.jpg)

But after watching sky encrypted channels for 3 mins the screen freezes and I can't decode any channels anymore. I have to restart the dbox to get another 3 mins of airtime again.

Everytime I restart it takes AGES for the decoding to kick in. It always shows "network" (Please look at CCam_error/2/3.jpg) before switching to "Card"(CCam_Working.jpg).

I have only manage to decode my channels 3 times so far.. Now all that happens is that its stuck in "network" mode or ccam/newcs crashes out. (CCam_crash.jpg)

Can anyone please help me?

-How do I get CCam to default to "Card" mode and not "Network" mode? (Or is this a problem with NewCS?)

-Is 450Mhz the correct frequency for reading UK Sky cards? (I tried 357 at no luck there either)

-Are there any specific NewCs config's for UK Sky cards?
(i can't seem to find any FULL tutorial on setting up newcs.xml - i am probably just crap at searching..)

-Why does CCam or NewCS crash out?