this how to is from other forum, the orignal writing is italian and was translate to english by babilon , the translations is not very good
GBOX How-to
Miniums -
to copy the rows gbox (to use gbox135.crack rename in gbox) in/var/bin via ftp -
to change attibuti the to the rows gbox in var/bin/with "chmod 777" -
to copy via ftp in var/keys the files gbox_cfg and cwshare.cfg -
if they are not present in var/keys, to insert also the several one files rom*.b, s2*.b
(beyond to the classics soft*.cfg etc etc) -
to open the rows/var/keys/gbox_cfg
Z parameter to put the IP of dreambox the Z: { 01 11 } 192,168,0,24 23
to put the IP of dreambox the parameter Or Or: { 00 } 192,168,0,24
to put the IP of dreambox the parameter L L: { 00 } 192,168,0,24 23 -
to save and to close the rows.
Activation of the GboxKeyGen.exe program:
- launch reg.bat (only before the time) -
launch GboxKeyGen.exe -
in the box serial to insert the number card (es.: if the n. card it is 0001,2345,6789 to remove the zeri and the last number, that is the 9);
we obtain the number: 12345678; to use the scentific calculator of windows, to insert the 8 figures and to convert them in esadecimale;
we obtain sequence BC61Ê, we add in front of the sequence a pair of zeri (00 BC 61 Ê).
This sequence goes inserted in the box "Serial" of the GboxKeyGen;
we press the key "Generated NDS ROWS";
in the blue part one serial of codes will appear.
- fairies copy-glue in rows of name nds (without extension) -
you take the rows as soon as created nds and mettetelo in/var/keys -
activated the emu on the img prechosen Connected the your smartmouse/phoenix (set up like smartmouse to 3.57/58 MHz) on the seriale of the DB with a normal seriale cable (pin-to-pin)
and inserted smartcard the NDS to you.
The IP address is not neccessary to change
This post has been edited 1 time(s), it was last edited by pippodark on 11.03.2005 20:33
picture of sky italia on a dream box
http://www.satnews.it/vbforum/showt...07&page=7&pp=20