sputnick
Regular Member
- Joined
- Jul 13, 2004
- Messages
- 160
- Reaction score
- 1
- Points
- 0
- Age
- 49
- My Satellite Setup
- DM7000S, movable dish 1m pointing at 13E, 5E and 4W. The Gemini Project 2.90 Image in Flash. No multi-boot.
- My Location
- Belgium - Brussels
This is the error message i get all day long today. Just bought today following ekeepment :
Dragon Cam 4.1
Fun 7 Prussian Galaxy 5 smartcard
Dynamite programmer ( _www.duolabs.com )
I've found all the info on how to upload, atleast i think so.
I've tried Dragon Cam in a Comag S*ca2 receiver and Dreambox7000s. Both recognise it as FIRECYPT 1.3. But when insert card and go to comman interface menu and click on smartcard, i get that msg as in " Smartcard ERROR ( no ATR ).
I red some about a phoenix mode, not sure what it is yet. I only used the USB cable to program the FUN7 card and did not connect Serial-cable.
Where did I go wrong. Any help appriciated a lot.
In the meen time, i'll keep on swimming through forums. Be back in an hour or so.
Dragon Cam 4.1
Fun 7 Prussian Galaxy 5 smartcard
Dynamite programmer ( _www.duolabs.com )
I've found all the info on how to upload, atleast i think so.
I've tried Dragon Cam in a Comag S*ca2 receiver and Dreambox7000s. Both recognise it as FIRECYPT 1.3. But when insert card and go to comman interface menu and click on smartcard, i get that msg as in " Smartcard ERROR ( no ATR ).
I red some about a phoenix mode, not sure what it is yet. I only used the USB cable to program the FUN7 card and did not connect Serial-cable.
Where did I go wrong. Any help appriciated a lot.
In the meen time, i'll keep on swimming through forums. Be back in an hour or so.