To programme a Diablo light cam you require a Cas 2 or Cas 3 programmer, if you have one, programming the Cam is quite easy.
First ensure you have the latest software for your Cas programmer, currently CIS 8.2.
Download, and uncompress, the latest Stealth firmware, currently Stealth215, you might require Winra,r or Winzip, to uncompress this file.
Once downloaded, and uncompressed, move stealth215.dup onto your desktop, it makes it easier to locate when required.
Start up your Cas software, click on the Cam Module tab, and then click on Diablo Cam and the Diablo Cam icon that opens up.
This brings up a separate window for the Diablo Cam.
If not already inserted, please insert your Diablo Cam into the Cas programmer PCMCIA slot.
Now click on the Cam Disk Functions tab and click Format, always a good step when loading a new Stealth version.
When formatting is complete, click on the Upgrade Cam tab.
Click on the little icon, with 3 dots, at the end of the file name bar.
Navigate to your desktop and stealth215.dup, and click open.
There should now be a little green traffic light on the Start Update icon, click on this and wait for your cam to be loaded.
Once completed, exit the programme and remove your cam.
When your cam is in your receiver navigate to the menu and click on Configuration.
Ensure the following are set:
Auto PMT ON
Emulators ON
Emulator priority 1-Emu 2-Cards
Your Cam should now work.
For some channels you might need to update the keys, but most packages are currently AU (Auto Update), so if you leave your receiver on the correct channel the channel should open.
Updating the keys can also easily be carried out with your Cas programmer.
Insert your Cam into the Cas programmer.
Download the latest Diablo keys.bin file, and again place it on your desktop.
Start up the Cas software and open up the Duiablo section.
Click on the Cam File System tab, and click Connect.
In the bottom left pane click on the new Diablo keys.bin file, and click the green arrow pointing right.
Click yes to overwrite the old keys.bin file, takes a couple of seconds, disconnecxt and exit the programme.
Your cam is now updated.
