Latest update: TPS works without interuption for the last few hours. What I did is this:
Install the following cams (I did it via blue button)
1) Evocam 2.11
2) Evocam config
3) Newcs_1.17
4) Newcs_config
5) Then ftp the latest keys, don't forget to CHMOD to 755!!
Note: I simply dumped a complete key bundle such as Satan keybundle (oywey.satandream.com, press forum button and download bundle) because I was not sure which keys are used. I suspect it is normal camd3.
6) Open up the camd_cfg file (is in var/keys) with a proper editor such as Ultraedit, and don't convert to DOS, and enter the following lines at the end:
wwwtps =
http://www.rubydesign.info/aes/linuxkeys.php
wwwtps_offset = 12
wwwtps_filter = %02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
that should do the trick.
Additional notes:
1) The URL could be any other one you know of where they do keys.
In some cases this might be an option
fill URL yourself)
wwwtps =
http://xxxxxxxxxxxxx/xxx/xxxxxxx.php
wwwtps_offset = 0
wwwtps_filter = 0500:007C00:0000000000:00:%02x%02x%02x%02x%02x%02x%02x%02x:%02x%02x%02x%02x%02x%02x%02x%02x
Or like this:
wwwtps =
http://vhmarrouk-tech-sources.110mb.com/cood/linuxkeys.php
wwwtps_offset = 0
wwwtps_filter = 0500:007C00:0000000000:00:%02x%02x%02x%02x%02x%02x%02x%02x:%02x%02x%02x%02x%02x%02x%02x%02x
2) Also, make sure that there isn't another "wwwtps" line in the config file.
3) Make sure the AU entry in the config file looks like this (so it will autoupdate):
# AU
# 00 is ignored (default)
# 01 enable AU
# 02 AU Auto
A: { 02 }
4) If it don't work, try rebooting, and make sure all the keys and scce are CHMOD correctly.
Let me know if it works for you