UPDATED April 12th 2010 :- Sly UK Bouquets

[megadata]

Thanks for this B16MCC
nice bouquet mate im still learning with my dm 800 only had it a few days but i got it installed ok no probs

could you tell me what i need to be doing to get a full epgas i only seem to be getting a couple of channels in epg

many thanks

 

[megadata]

Thanks for this B16MCC
nice bouquet mate im still learning with my dm 800 only had it a few days but i got it installed ok no probs

could you tell me what i need to be doing to get a full epgas i only seem to be getting a couple of channels in epg

many thanks

 

[B16MCC]

Totally depends what image your using mate. If you're using Nabilo BH 0.12 then simply download the SatMate one from the list in the EPG panel list.

 

[B16MCC]

Totally depends what image your using mate. If you're using Nabilo BH 0.12 then simply download the SatMate one from the list in the EPG panel list.

 

[scooby9858]

what a great bouquet it must have taken quite a while thanks.

 

[scooby9858]

what a great bouquet it must have taken quite a while thanks.

 

[B16MCC]

Post bumped .
Bouquets updated and reattached to first post.

Keep this thread on topic please guys, lets not expand into EPG discussion and beyond.

 

[faisalpandu]

Hello

Can i just top post on the bouquet list. Can i use this on my DM500s using Pli Jade image. An do i need to change to type 2 or is it a case of ftp the files across. Also for Pli jade what files fo do I ftp to which folder

 

[FoxForceFive]

Fantastic work mate, thanks so much.

I'm glad I came across this, was planning on doing it all myself. You've saved me hours!

 

[B16MCC]

faisalpandu:- Bouquets are not Image specific, the files always go in the same place, however those places do differ between E1 & E2 images. Thats why there are settings options in DBEdit. Simply use DreamboxEdit to open the bouquets. Set options to 'Satellite Receiver' and enter Dreambox IP and password then save. Now simply click FTP and send the files to the box.

Your options page should look like this...

:-snowman

 

[packetstormer]

I have ftp'd this across to my DM500 and reloaded it. However, what should I be expecting? Nothing changed on my EPG and I don't have any extra Bouquets in the any menus. Am I missing something stupid?

 

[B16MCC]

What did you use to FTP them ? You should be using DreamboxEdit and make sure you set it up to suite your enigma 1 box. Read the rest of the thread, its been covered already.

 

[andel]

faisalpandu

As you said above you must change the type to type 2 in dbedit in order to use these bouquets on an E1 image. Click 'Tools' drop down menu then change version to 2,3 or 4. Once this is done you can ftp to the box.
I know as I experienced the same problems you are having when trying to put them on my DM600

...and as B16MCC said you must have the correct paths to suit you E1 box too

 

[B16MCC]

By selecting the settings buttons in the options page you are doing the same thing as selecting 'Toggle Between.....' from the Tools drop down menu.

Enigma1 Settings Are:-
Satellite Receiver = Version 2
C a b l e Receiver = Version 2

Enigma2 Settings Are :-
Version3 Settings = Version 3
New Enigma Settings = Version 4

Sure you don't need to do both ?

 

[andel]

Yes it appears to be seperate. If you open your bouquets and look in the bottom right of DBedit it says the type, I then changed the options to E1 and the 'Type' stayed at type 4 untill you change it from the drop down menu.
The options only change the paths.

Edit:- I just did it again and it changed the type...strange, either way its a safe bet that the type setting is faisalpandu's problem

 

[packetstormer]

What did you use to FTP them ? You should be using DreamboxEdit and make sure you set it up to suite your enigma 1 box. Read the rest of the thread, its been covered already.

I used DreamboxEdit 3.0 and set the setting as your image upload in a previous thread. All the files have FTP across correctly as I can ssh in to view them. However, like I said, nothing has changed on the DM.

 

[B16MCC]

when you sent the bouquets from DBEdit, you need to restart enigma. Make sure you have setup DBEdit correctly as discussed above. There's really nothing to it.

 

[packetstormer]

when you sent the bouquets from DBEdit, you need to restart enigma. Make sure you have setup DBEdit correctly as discussed above. There's really nothing to it.

Yeah, I did restart it, many times. I would have though it was east too. However, all I have in Bouqets is "Removed List" and whenever I try to edit/add to it or any other, the box reboots itself.

 

[B16MCC]

Do the bouquets look ok when you open them in DBEdit ? That at least checks your zip download is intact. See Attached picture.
Next, are you happy you've setup the options in DBEdit correctly ?
If so, reboot the box, then FTP the bouquets to the box using DBEdit.
Then use the 'Reload Settings On Dreambox' button in the FTP page of DBedit to restart the box.
Let us know what you get after that.

 

[compufunk]

With some images/settings, for some reason I found that no amount of restarting enigma would load the new settings.

Assuming everything else is correct, (paths, types etc) after FTPing the files across click 'Reload settings on Dreambox' on the right hand side of the FTP dialogue box. This did the trick for me.

I've not looked into it, so I don't know how clicking this button differs from restarting enigma.

EDIT: I wish there was some warning system in the forum software to alert you that someone else is replying to a thread.