Pete1966
New Member
- Joined
- Aug 7, 2016
- Messages
- 3
- Reaction score
- 1
- Points
- 3
- Age
- 58
- My Satellite Setup
-
Vu+ Solo2
Motech Vbox II
- My Location
- Helsinki, Finland
Can someone please advice how the setup in Vu+ Solo 2 should be in my case. I have following equipment:
- Inverto Black Ultra Single HGLN Universal LNB
- Moteck V-Box 2 positioner to control 36V actuator
- Vu+ Solo2 receiver
LNB is now connected to Moteck and from Moteck it's connected to LNB2. LNB1 in VU+ has nothing connected. In Moteck I have 7 satellite positions. Astra 19,2E is stored in positions 001.
How the setup should be for receivers A and B in VU+?
Problem is that so far I haven't been able to get any signal to receiver. I have checked each satellite position to be correct with Satlink WS-7000 meter and I can see the channels with the meter as well.
What kind of LNB setup there should be in Vu+?
- Inverto Black Ultra Single HGLN Universal LNB
- Moteck V-Box 2 positioner to control 36V actuator
- Vu+ Solo2 receiver
LNB is now connected to Moteck and from Moteck it's connected to LNB2. LNB1 in VU+ has nothing connected. In Moteck I have 7 satellite positions. Astra 19,2E is stored in positions 001.
How the setup should be for receivers A and B in VU+?
Problem is that so far I haven't been able to get any signal to receiver. I have checked each satellite position to be correct with Satlink WS-7000 meter and I can see the channels with the meter as well.
What kind of LNB setup there should be in Vu+?
, set the "LNB" to DiSEqC 1.2, Universal, USALS = no and then set positioner number for each satellite (in your example, 19.2E satellite should have position 001 set in the menu).
