antrabe
Member
- Joined
- Feb 1, 2017
- Messages
- 195
- Reaction score
- 39
- Points
- 28
- My Satellite Setup
- dreambox7080 dm900 viark droi
- My Location
- spain
Today i disasemble all the installation and for my surprise all the motor frame were loose thats why i had too much play in the pole of the motor.
I put the pole as much as possible plumb and now is almost full vertical. Next week i will place a wire pulling from the rear part.
My dish is to much heavy i know and i have this installation from 2014 soon i will replace for 1.8 porlar mount but until that moment i would like to fix this one.
this afternoon i got to tune in 28, 19, 16, 13, and 0.1W more or less fine tomorrow i will try again.
What i did today is to change the position of the motor on the clamps i had before in the upper scale which 40 is the mInimun reached. that was so extrange for me because my location is 37 latitude.
Now is like this
I put the pole as much as possible plumb and now is almost full vertical. Next week i will place a wire pulling from the rear part.
My dish is to much heavy i know and i have this installation from 2014 soon i will replace for 1.8 porlar mount but until that moment i would like to fix this one.
this afternoon i got to tune in 28, 19, 16, 13, and 0.1W more or less fine tomorrow i will try again.
What i did today is to change the position of the motor on the clamps i had before in the upper scale which 40 is the mInimun reached. that was so extrange for me because my location is 37 latitude.
Now is like this
Attachments
Last edited: