Wanted 76mm diameter ground stand wanted.

[Chr0nik]

Hi,

I've gotten a second CM 120cm dish with a polar mount which I would like to use for C Band. Does anybody have a 76mm diameter ground stand they don't need or use and would like to get rid of it?

Please let me know.

Thanks!

 

[Channel Hopper]

Ground or wall mount ?

 

[Chr0nik]

Ground would be ideal

 

[Channel Hopper]

Apologies, I should have written combination mount (I think I have the original Channel Master 3" wall mount that could be used as a floor stand if three blocks / kerb stones were strategically placed on the ground). They were fragile though, with alloy end prices on the arms that could fracture if tightened up incorrectly.

This looks like it might be worth buying if you want to retain the h to h gearbox, not checked the carriage to the Uk though.

Stab DiSEqC Motor HH120 number one in the market up to 120 cm free delivery

The Stab HH120 is the best and most robust on the market compatible with all receivers working on DiSEqC 1.2 or USALS.

www.orbitadigital.com

 

[Burnham Beech]

I have a ground mount here I don't use now. The pole is heavy steel, painted black. 1 metre long x 76mm outside diameter. There are six heavy metal struts and all the nuts. I don't know if it is Channel Master branded.

 

[Captain Jack]

Ditto. It's not heavy duty but is relatively light and has been sand blasted and powder coated a while back and has been in storage since.

 

[jeallen01]

The old ground mount (with a 60mm pole) that I have here is made of welded steel and weighs a lot - but a heavy hammer would just bounce off it! Still available f.o.c., for collection!

 

[Channel Hopper]

I thought it had a 50mm pole.

 

[jeallen01]

I thought it had a 50mm pole.

No, measured the diameter before I listed in the Classified Section - and it's 60mm

 

[Chr0nik]

I'm not sure if the other member who wanted to collect the mount has done so but I've sort of DIY it today and made a mount for the dish.

I'll mount it on a mast that I have and see how it works.

 

[ozumo]

Are you not using the polar mount? An extra U-bolt might be sensible

 

[Chr0nik]

Are you not using the polar mount? An extra U-bolt might be sensible

I will be using the polar mount on my other dish but it's in pretty poor shape - I want to paint it and get the screws/bolts replaced before mounting it.

Good idea regarding the extra U-bolt, thanks!