Recent content by vulmac

I am never around for these gags

An update on the solution I have had another shot with installing underworld 142 on the Diblo cam I did not format the cam this time and the results are excellent. In the top cam slot there was a little of picture judder nothing to worry about but in the bottom slot the picture is perfect. how...

Delete the BBC Hd and do rescan to get it back

It happens right away the picture gets very watery and at times freezes for a second or two.

I have a Fortec Star Passion receiver and Diablo cam 2.3. I have been having a problem with the picture jerking .It has been getting getting progressively worse every minute or so. I reinstalled the latest loader and firmware.The glitching was happening with F.T.A channels to a lesser extent...

Downloaded the latest Cas 8.6 I tried Underworld 142 and Underworld 136. downgraded the receivers firmware still no luck with Underworld. have installed Stealth 254 working fine except lost the channels on Thor.

I have a Fortec Star Passion receiver and Diablo cam 2.3. I have been having a problem with the picture jerking .It has been getting progressively worse every minute or so. I reinstalled the latest loader and firmware.The glitching was happening with F.T.A channels to a lesser extent. With this...

I think you are supposed to do a factory reset before installing new firmware. And do not forget to backup your current channels. You can then restore them when you install the new firmware

:-DOH!I had this problem with Diseqc and it was driving me mad. I thought it was the motor. The dish would sit on one satellite and would not move. The way I got out of it was to disable all limits in Diseqc and press go to satellite. I then set to USALS and as long as I did not set any...

I spent two nights adjusting my dish to get the Thor signal a little better. It did not make a great deal of difference. I decided to check my lnb to see could I get a better one with a lower signal to noise ratio and there was the problem. The collar holding the lmb in place had sprung slightly...

Sorry I forgot the new Dreambox is out with HD but very new and a bit pricey at the moment:toke:

No nothing showing up on it. I had Discovery HD on Thor I had to enter all manually and it was working ok. I was having problems with the motor and done a factory reset on the Passion. Now I cant remember where I got the instructions in the first place.

No they do not appear on the scanned list. The ones I was looking for were Discovery HD and Kanal 5 HD on Thor and any others available. I am using the latest firmware and loader for the Fortec Star. Luxe Hd is ok as is BBC HD ITVHd on 28 East. Premier Hd and Discovery HD are ok on 19 East .I...

Think again about the Dreambox. I have had one for four years now and indeed it is a great box . Unfortunately it is not HD and this is the way to go.I purchased a Fortec Star Passion recently picture quality great and opening a lot of channels with Diablo cam 2.3.

I first scanned Thor and a few other satellites and my Fortec Star Passion will not pick up the HD channels. I then entered all the required information manually using the remote which failed and then Setedit which also failed. Is there a reason for this as I had a problem getting ITVHD to setup...