Vauxman
Member
- Joined
- Aug 1, 2021
- Messages
- 17
- Reaction score
- 0
- Points
- 1
- Age
- 44
- My Satellite Setup
- Pace MSS1000
- My Location
- Wolverhampton
Hello all,
Sorry if this has been mentioned before....
I have a question regarding moving my old 60cm offset dish to 28.2E. I say old, the dish has been up for a while and a little rusty, but not to bad, installed this system I have years ago on 19.2E, it's a pace mss1000 system i used to use, I currently use an F3 box, I was looking into just getting a freesat box and sell the F3, but having trouble setting the dish to 28.2.
I have a Satlink ws-6909 which I haven't used in a while, every time I select 28.2E the signal is low, even though I've set the dish to 28.2,well have I!.. I noticed if i change the TP num to frequency 11345 either H or V,i have good signal, but still not convinced I'm on the correct satellite... If I reset the dish to 19.2, the signals spot on, right upto 26E on the satlink with dish pointed at 19.2 the signals okay, but as soon as I select 28.2 and move the dish,(TP Num frequency 11222),the signals low.
It says on dish pointer my elevation is 23.6 and az is 144.2, can't seem to set this correctly... 19.2 azimuth seems to work on 138 degrees, not the 154.3 recommended.
Do you all think I'm setting wrong or do I need a newer dish a Mk4 or higher, as its the only thing I've not changed. I have a quad LNB, SC519Q S/S which is working well as far as I can tell, so other that, maybe the dish is to old I'm not sure.
Please advise if anyone can,
Cheers all
Sorry if this has been mentioned before....
I have a question regarding moving my old 60cm offset dish to 28.2E. I say old, the dish has been up for a while and a little rusty, but not to bad, installed this system I have years ago on 19.2E, it's a pace mss1000 system i used to use, I currently use an F3 box, I was looking into just getting a freesat box and sell the F3, but having trouble setting the dish to 28.2.
I have a Satlink ws-6909 which I haven't used in a while, every time I select 28.2E the signal is low, even though I've set the dish to 28.2,well have I!.. I noticed if i change the TP num to frequency 11345 either H or V,i have good signal, but still not convinced I'm on the correct satellite... If I reset the dish to 19.2, the signals spot on, right upto 26E on the satlink with dish pointed at 19.2 the signals okay, but as soon as I select 28.2 and move the dish,(TP Num frequency 11222),the signals low.
It says on dish pointer my elevation is 23.6 and az is 144.2, can't seem to set this correctly... 19.2 azimuth seems to work on 138 degrees, not the 154.3 recommended.
Do you all think I'm setting wrong or do I need a newer dish a Mk4 or higher, as its the only thing I've not changed. I have a quad LNB, SC519Q S/S which is working well as far as I can tell, so other that, maybe the dish is to old I'm not sure.
Please advise if anyone can,
Cheers all