hi mateimage said:As per title, can I use a TV link supercombiner in conjunction with their IR distribution amp?
Many thanks.
i have one box on 60 and other on 40ralphmagno said:each box should be 1 channel apart.
if one box is on ch 21 the next one should be on 23 the next 25 the next 27 next 29.
this keeps the side bands from interfering with eachother.
ralph
parm21 said:is that ok or must they be just 1 apart
thank you for all your helprolfw said:OK, can you give a little better explanation of what you have and what does or doesn't work, as I can't tell from your very brief posts.
The output channel on the digibox will not affect the TVlink infrared operation, only the quality of the picture. With the SPC4, you need to tell each remote which port they are going to control, both digiboxes must have the 8v power set to on in the installer menu. All this is in the SPC4 instructions.
rolfw said:That's a shame, hoped the new amp might cure it for you.
Have you tried the Sky HD on port 0? Have you tried the port setting on the remote on port three, but the HD box on Port 1?