90 cm motorised dish

thanks all who helped me get tv zimbo, I changed the longtitude from 1 to 0.2 then I had a signal to tv zimbo transponder and the box found it. Many thanks
 
Only too pleased that we could help you :)
 
Latitude: 51.4741°
Longitude: -0.9503°

Satellite: 10E EUTELSAT 10A
Elevation: 30.2°
Azimuth (true): 166.1°
Azimuth (magn.): 167.2°
 
One minute I had tv zimbo then the signal went after I changed the longtitude settings. I do not know what to do
 
costas1234 said:
Latitude: 51.4741°
Longitude: -0.9503°

Satellite: 10E EUTELSAT 10A
Elevation: 30.2°
Azimuth (true): 166.1°
Azimuth (magn.): 167.2°
Click to expand...

Then change your Longitude settings back to where you had it in post#22 of this thread.
 
william-1 said:
Please state the nature of your reception problem.
Click to expand...
on 11345 H 27500 I have a high strength signal on 10 east, same on 11419 high strength signal, but on tv zimbo 10756 I have adjusted my longtitude setting and lost the channel signal.

i have been moving the satellite position to 0.2 west, 0.3,0.4 up to 1degree west on the longtitude degree and my receiver is still not finding it.
 
That is because some transponders on this satellite are very strong & some like TV Zimbo are not so strong as mentioned earlier in this thread you may need a bigger dish.
 
Back
Top