B16MCC
Dreambox Gimp & Coder
- Joined
- Nov 16, 2005
- Messages
- 1,562
- Reaction score
- 8
- Points
- 0
- Age
- 51
- My Satellite Setup
-
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
- My Location
- /var/tuxbox/config
Hi peeps. Having 2 DM's I have my remote control programmed to control one DM on the Dream button and the other DM on the Shift Dream button ( AUX Mode).
To coinside with this I have to telnet the following commands to my boxes to ensure they only respond to the correct commands from the one remote.
Box 1 echo 1 > /proc/stb/ir/rc/mask0 (box responds to dream only)
Box 2 echo 2 > /proc/stb/ir/rc/mask0 (box responds to shift-dream only)
Without these commands the boxes repsond to both remote channels.
My question is , how would I add that command so its executed when the box powers up. This would save me from having to telnet in and set them manually if I reboot a box.
Thanks gang..
MCC
To coinside with this I have to telnet the following commands to my boxes to ensure they only respond to the correct commands from the one remote.
Box 1 echo 1 > /proc/stb/ir/rc/mask0 (box responds to dream only)
Box 2 echo 2 > /proc/stb/ir/rc/mask0 (box responds to shift-dream only)
Without these commands the boxes repsond to both remote channels.
My question is , how would I add that command so its executed when the box powers up. This would save me from having to telnet in and set them manually if I reboot a box.
Thanks gang..
MCC