Align dish to 27.5°W

Woffelmannen

Woffelmannen

Regular Member
My Satellite Setup
Humax Vaci-5350, Triax TD64, Triax Single Cable LNB TSC 001, Eutelsat 5W, 100cm dish, 4 lnb, Astra 19.2, Hotbird 13, Astra 4.8, Thor 0.8, 180cm Prime Focus, Astra 28.2

80cm dish, Samsung SMT-S5140, Astra 4A Viasat Family
My Location
Halland, Sweden
Hi! I am trying to align my dish to 27.5°W. The problem is that I haven't any DVB-S2 STB or any reliable software to see the signal strengh on my computer. Do anyone have any suggestions that would help me? Is there any ku band DVB-S transponders active or any good software that I can use to see the signal strengh?
//Marcus
 
Yes it is not easy to align dish to 27.5°W because a few transponders in use.
But You can first align dish to 30°W.
Much easier. And then push a few degrees to east and up little bit.
 
Without DVB-S2 this position is pretty useless ;)

I can't get any plain DVB-S transponder
 
My TechniSat SkyStar S2 is DVB-S2 but I can't find any software to measure the signal strengh and quality. I tried Prog satfinder and Fast Satfinder but none of them worked very well

Skickat från min SM-G900F via Tapatalk
 
To read signal quality and strength, you'll have to find the position and a transponder first.
 

Attachments

  • Snap474.webp
    Snap474.webp
    56.8 KB · Views: 20
Yes.....start off with the easy one at 30.0ºW to locate then move as advised above.

EBSpro Lite should do the job:-

Good luck with this. respect-048.gif

Downloads | EBSpro

ebs1.webp

ebs2.webp
 
Back
Top